ONTAP Discussions

Upgrade snapmirrorred units

JosepM
1,337 Views

Hello.

I have a couple of boxes with snapmirror (2 SVM) in sync.

I would like to upgrade both of them. I tried to start upgrade on DR unit but it faile because one lif is not at home (and it can't be returned to home) because is the LIF that should be used in disaster event.

I tried to quiesce both snapmirror tasks but the issue is still the same.

Also I tried to put status-admin for the lif on down. But always the same error:

 

Error: command failed: This operation is not permitted on a Vserver that is configured as the destination for identity preserve Vserver DR.

 

Any help will be appreciated to fix this issue and proceed with the upgrade,

3 REPLIES 3

RossC
1,293 Views

Hi @JosepM 

 

Not sure if you've had a look at our KB Site for some answers (https://kb.netapp.com). You may have already tried that.

 

There are a couple of extra steps via CLI if you need to change attributes of your SVM DR - https://kb.netapp.com/onprem/ontap/os/How_to_modify_the_home-port_of_the_LIF_in_the_destination_of_SVM_Disaster_Recovery

 

Some more general info here - https://kb.netapp.com/onprem/ontap/dp/SnapMirror/How_to_modify_SnapMirror_destination_volume_size_and_other_attributes 

JosepM
1,242 Views

Hello.

I'm sorry but I've been reading several documents and seems that the problem is on LIFs. Some of them are disabled to avoid addressing conflicts on the network with production system but are still configured to improve DR plan execution time. Also seems that SVM have to be started in order to unconfigure the LIFs, and I'm not sure this could impact on snapmirroring process running.

So I'm still lost.

Are there any upgrade focused documentation to proceed with system upgrade?

Thanks.

Ontapforrum
1,232 Views

Could it be b'cos the destination is 'identity preserve Vserver DR'.

 

The following KB provides steps to change the identity without re-basing, you could try changing the identity-preserve_setting to false, and then may be able to modify the LIFs and perform upgrade?
https://kb.netapp.com/onprem/ontap/dp/SnapMirror/Change_a_misconfigured_SVM_DR_-identity-preserve_setting_to_either_True_or_False

 

If unsure, please raise a ticket with NetApp and get it reviewed once.

Public