View Paths on Windows 2012 R2 without NetApp DSM

[darraghos]

Guys, using Windows 2012 R2 with native MPIO (as advised by our vendor NetApp Partnet). On our SAN attached servers we have 8 paths through the fabric and some systems with 100+ LUNs attached. In Windows 2012 R2, without a DSM how does one see these paths? The only was I can see is by going into device manager, right clicking the disk and looking at the MPIO tab. Not great with 100 disks 😞

[Sahana]

Hi,

It would be useful to use Netapp DSM in this case. Refer KB https://kb.netapp.com/support/s/article/ka31A00000011ZiQAI/how-to-verify-windows-fibre-channel-configurations-with-multipathing-i-o-mpio?language=en_U...