ONTAP Discussions

View Paths on Windows 2012 R2 without NetApp DSM

Guys, using Windows 2012 R2 with native MPIO (as advised by our vendor NetApp Partnet). On our SAN attached servers we have 8 paths through the fabric and some systems with 100+ LUNs attached. In Windows 2012 R2, without a DSM how does one see these paths? The only was I can see is by going into device manager, right clicking the disk and looking at the MPIO tab. Not great with 100 disks 😞

Re: View Paths on Windows 2012 R2 without NetApp DSM



It would be useful to use Netapp DSM in this case. Refer KB https://kb.netapp.com/support/s/article/ka31A00000011ZiQAI/how-to-verify-windows-fibre-channel-configurations-with-multipathing-i-o-mpio?language=en_U...

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.
Cloud Volumes ONTAP
Review Banner
All Community Forums