Hi, all my clusters are sending their syslogs via their node_mgmt interfaces, except for one. In this one (2-node cluster) one node sends via node_mgmt and the other via cluster_mgmt. Because of how my company validates the syslog sources, I need all my syslogs to come from the node_mgmt interfaces, but there's no way to force it to. Why is one cluster behaving like this? When I migrate the cluster_mgmt-interface to the other node, this node stops sending through the node_mgmt and cluster_mgmt takes over. I'm confused. Cheers, ConfusedParrotfish
... View more
We recently placed in production a FAS 8300 (9.14.1P6). We had a FAS2650 for seven years. We built a Windows 2019 with ActiveIQ Unified Manager 9.14. When we first tried to add the ONTAP to the Unified Manager, it told us the self signed cert has already been expired. We followed the instructions below https://kb.netapp.com/on-prem/ontap/DM/System_Manager/SM-KBs/How_to_renew_an_ONTAP_selfsigned_certificate_via_System_Manager Under the client/server certificates tab, we renewed the self signed cert for the expired SVM self signed cert in which we got a new self signed cert with a new name. Then we deleted the original self signed cert (SVM). Then we did the same and renewed the cert for the cluster but we didn't remove the expired self signed cert (cluster). We went through the process again to add the ONTAP cluster but it would just hang forever with the spinning circle. We have a few questions as a result of this process. 1) The renewal of the certs does not affect users access on CIFS shares? 2) How do we fix the issue described above (trying to add ONTAP onto ActiveIQ Unified Manager). SVHO
... View more
We are trying to setup zero touch provisiong for Netapp CDOT systems.
Does Netapp support any option to boot OnTap non-interactively, (may be using netboot) and configure interfaces, user account, and cluster ?
... View more
Just dropping this here as I received it via email the other day...... I don't work for NetApp.
Admin edit: Message contents have been removed. The contents of this Product Communique can be found on the NetApp Support Site, here: https://mysupport.netapp.com/info/communications/ECMLP2880232.html
... View more
Hello. We are planning to migrate from A200 equipment using 9.4 os to new equipment. Before that, there are more than 100 volumes created on the A200 equipment, but there is nothing organized about what the customer manager actually uses. So I need to know what server uses volume A customer representative has checked the ip from the net connections active show-client command, and it is said that there is a server that is actually in service, but the ip has not been extracted by the command. statistics vol show, qos statistics vol performance show It is possible to check volume performance with the command, but there may be volumes that generate IO when not monitored, so it will be difficult to check with that method. Since version is 9.4, there is no volume usage record in GUI, Is there a way to check other volume usage? Due to the large number of servers, it is difficult for the person in charge to check the servers daily.
... View more