ONTAP Discussions

cluster switches with two cluster

chinchillaking
1,103 Views

hello,

 

- first new fas will join to exist cluster1 vol move migrate data
- second new fas will join to exist cluster2 vol move migrate data with above same cluster switches
- after cluster2 migrate finish (around 2 to 3 weeks), clutser will change to switchless

 

could it work for temp use vol move data mirgate?

1 ACCEPTED SOLUTION

AlexDawson
1,080 Views

Hi there, it is not supported to use the same cluster switches for two clusters. To be safe, you should do the migrations one cluster at a time.

 

If you have no other choice, configuring the switches to split each cluster up into seperate VLANs so that they do not see each other's traffic, and trunking the VLANs over the ISLs between them may provide functionality, but it would not be supported.

View solution in original post

1 REPLY 1

AlexDawson
1,081 Views

Hi there, it is not supported to use the same cluster switches for two clusters. To be safe, you should do the migrations one cluster at a time.

 

If you have no other choice, configuring the switches to split each cluster up into seperate VLANs so that they do not see each other's traffic, and trunking the VLANs over the ISLs between them may provide functionality, but it would not be supported.

Public