ha-config-check.cgi

[TDUBB1234]

when i run the ha-config-chekc.cgi script on both active active systems

I got this

root@xxxxxxxxxxxxx password:

c0a (192.168.1.82) on x does not have a partner on y

c0b (192.168.2.57) on xdoes not have a partner on y

e0P (192.168.0.32) on  xdoes not have a partner on y

c0a (192.168.1.6) on x does not have a partner on y

c0b (192.168.2.44) on  x does not have a partner on y

e0P (192.168.3.145) on x does not have a partner on y

what does this mean?

[vaughn_ratilla]

set your /etc/rc like example below:

filer1

hostname filer1

ifconfig e0P `hostname`-e0P flowcontrol full netmask 255.255.255.0 partner e0P

ifconfig c0a `hostname`-c0a mediatype auto flowcontrol full netmask 255.255.255.0 partner c0a

ifconfig c0b `hostname`-c0b mediatype auto flowcontrol full netmask 255.255.255.240 partner c0b

filer2

hostname filer2

ifconfig e0P `hostname`-e0P flowcontrol full netmask 255.255.255.0 partner e0P

ifconfig c0a `hostname`-c0a mediatype auto flowcontrol full netmask 255.255.255.0 partner c0a

ifconfig c0b `hostname`-c0b mediatype auto flowcontrol full netmask 255.255.255.240 partner c0b

[lovik_netapp]

This means you have not defined partner entry for your network interfaces, use ifconfig switch "partner" to define the partner entry in rc file and run the command on command prompt also to put the same in effect immediately.

If you can post your /etc/rc entry and "ifconfig -a" output we will be able to assist you further.

Cheers,