ONTAP Discussions

init failed on failed disk replacement

Im pretty green and still learning alot about netapp, had a disk fail, So i replaced it with a disk i already had unowned. i have done this only a few times, but this one is giving me



Broken Details:: init failed


If i Command line in, it will say FAILED under Pool



Any thing i should try or maybe another disk?


Thanks in advanced.


Re: init failed on failed disk replacement



please check the disk compatibility. Please refer a similar discussion: https://community.netapp.com/t5/Data-ONTAP-Discussions/Disk-replacement-init-failed-no-physical-data/m-p/128555#M27878

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.
Cloud Volumes ONTAP
Review Banner
All Community Forums