Hi there,
I have installed the ontap virtual appliance 9.6 in VMware workstation to include it in a vcenter lab that I created before, the thing is that I'm not able to ping any other node in the storage network from the appliance and any other nodes cannot ping the LIf's, this is my firts time touching a netapp system so Im not sure if i did sonthing wrong, this is the actual configuration:
Switch eth1: 10.1.1.123
Windows VM: 10.1.1.111 - 255.255.255.0 - 10.1.1.123
vmk1-iscsi(esxi1): 10.1.1.101 - 255.255.255.0 - 192.168.0.1
vmk1-iscsi(esxi2): 10.1.1.102 - 255.255.255.0 - 192.168.0.1
LIF1:
10.1.1.115 - 255.255.255.0 - 10.1.1.123
Data protocol access: iscsi
Role: data
Eth port: e0d - Up
LIF2:
10.1.1.116 - 255.255.255.0 - 10.1.1.123
Data protocol access: iscsi
Role: data
Eth port: e0d - Up
SVM status: Running(iscsi)
Ping from Win VM to both ESXI's: works fine
Ping from both ESXI's to Win VM: works fine
Ping from Win VM to LIFs: Not working
Ping from LIFs to Win VM: not working
Ping from LIFs to both ESXIs: not working
Ping from ESXIs to LIFs: not working
Ping from LIF1 to LIF2: works fine
Ping from LIF2 to LIF1: works fine
Ping from LIFs to default gateway: works fine
What could be causing this or what should I check?
everything seems to be up and I believe the network is working fine as win vm and esxi's are communicating fine but i think the problem is on the ontap appliance, correct me if Im wrong.
