ONTAP Discussions

snmp.server.busy

MohamedShehata

hello all,

 

we have a netapp storage running cdot [version: NetApp Release 9.6P3 ], we have  the below issue and need to know the solution or the troubleshooting steps for it: 

 

Event:
snmp.server.busy: SNMP daemon is busy serving a high rate of incoming SNMP queries.
Message Name:
snmp.server.busy
Description:
This message occurs when the SNMP daemon is busy serving a high rate of incoming SNMP queries. This might be caused by multiple SNMP clients querying the cluster or a malicious client attempting a denial-of-service attack. SNMP clients might experience delays or timeouts.

1 REPLY 1

Re: snmp.server.busy

ttran

Hello @MohamedShehata ,

 

If these SNMP errors occurred recently and your system has been running for an extended time, these "snmp.server.busy" messages could be caused by a recent issue on your system that is internally sending "Health Alerts" using SNMP.

 

You can fun the following command from the Cluster shell to see if there are any internal alerts on the Cluster that needs addressing: "::> system health alert show -instance". If there are alerts and after you address the issue, you will then need to manually delete the health alert from the Cluster shell using "

 

Command Reference: System Health Commands 

 

If there are no Health Alerts on the system, you can also try to increase the timeout value on your SNMP Server to allow more timeout for pending requests to complete, which will reduce the amount of retransmits/re-polling.

 

 

Regards,

 

Team NetApp

Team NetApp
2021 NetApp Partner Experience Survey
PES Banner
All Community Forums
Public