ONTAP Discussions
ONTAP Discussions
Hi All,
If the controller is single head, only one interface use for data ,(e.g. "e1a") with ip subnet 10.21.33.X netmask 255.255.255.0
Can this controller create vfiler with different subnet IP (e.g. 10.21.35.X netmask 255.255.255.0) ?
Thanks
Alex
You can but only with vlans if different subnets. I the same subnet you could ifconfig alias on e1a to add additional ips. For different subnets on e1a you would need to create e1a-xx ad e1a-xy. For each subnet then enable on the switch.
I would also create an Ipspace for he vFiler so that the two subnets don't share a routing table and each can have their own default route.
Thank you for your quick reply.
Would you like to give me some example to configure vfiler ??
Thanks
Alex
I posted a PDF of the vFiler lab guide I wrote. You can search for it in one of the posts or I can find later when back on my laptop.
Sent from my iPhone 4S
Thank you so much
Alex
Do you have lab on demand access (partner or var)? The Lab on Demand folks took our preso and labs from the Insight conference and posted to the lab environment in March. This is the link https://communities.netapp.com/docs/DOC-15001
Link to the lab PDF file which is a good MultiStore reference. https://communities.netapp.com/servlet/JiveServlet/download/15001-1-32930/CR-3-133%20Hands-On%20MultiStore%20Advanced%20Lab%20Guide%20FINAL.pdf