ONTAP Hardware

Alias name for a disk

Vigneshkumar
1,908 Views
Hello,

In NetApp storage filter (say FAS 6000 series model) , I receive disk failure alert for the same disk with two different host adapter names.
Say disk '7d.22.10 failed' and 'disk 3c.22.10 failed' both point to the same disk.
note that host adapter (7d ,3c) is different but shelf (22) and bay (10) are the same.
Any command available in NetApp to view different host adapter names for the same disk ?
2 REPLIES 2

Jeff_Yao
1,864 Views

"storage disk show -p" would be your best option.

of course, evivronment shows it as well, but not the intuitive. 

 

hopefully helps

 

thanks

 

Jeff

Vigneshkumar
1,841 Views

Thanks!! Further. Please let me know the subcommand to be used, this seems to unrecognized.

 

output follows:

 

storage: unrecognized command "disk"
usage: storage <subcommand>
subcommands are:
alias [ <alias> { <electrical_name> | <sn> } ]
disable adapter <name>
download shelf {channel | shelf}
:: to download latest shelf firmware available on this appliance

download shelf -R -T <enclosure_type>
:: to revert firmware to the version shipped with the current Data ONTAP version

download acp [<adapter_name>.<shelf_id>.<module_number>]
download acp -R to revert firmware to the version shipped with the current Data ONTAP version
download status shelf

Public