I am new to the NetApp world.
We inherited two FAS2552 disk arrays with OnTap 8.2.3P3 7-Mode, each one contains 24 disks : 12 with a size of 600Go and 12 with a size of 1.8To, all the disks are 10K.
We found that we had two failed disks one on each array, so we bought two "new" disks with size of a 1.8To at 10K , at least that's what was written on the label.
We changed one of the failed disks without problem, but the second one showed us a wrong effective size.
A 1.8To disk shows : 1.64To as physical size and 1.63To as effective size, the new disk showed : 1.64 as physical size and 1.09To as effective size.
We tried zerroing the disk whithout luck.
We did return the disk for replacement and we got a new one labeled 1.8To 10K, but it was the same problem, 1.09To as effective size, and even more since this new disk was detected as 15K disk!!!!!
We did a test :
- We plugged the new disk that was correctelly recongnized on the other FAS and it was recongnized without issues.
- We plugged the new delivered disk on the other FAS and it we got the same problem : effective size and tpm
Is there other tests we can do to be sure that it's a disk problem not a disk array problem?
Is the disk model number recognized correctly in sysconfig -a? if it works well on the other array, I'll compare the disk qualification package between the two (or just update it)
The NetApp Support Site won an Association of Support Professionals Best Support Website in 2022 award.
Live Chat, Watch Parties, and More!