ONTAP Hardware

FAS2650 consol port

bahmed
25,459 Views

Hello everyone,

 

I powered on my neww FAS2650 after cabling, but when i want to access to the system by console port in first time it display that the system is initialising as showing in picture, after that nothing it is happening .I want to do the first configuration of the system(cluster,mgmt interface ...).

 

Thanks alot.

1 ACCEPTED SOLUTION

robinpeter
25,326 Views

New Netapp Controller have Baud Rate as 115200

The old system had the Baud Rate as 9600 

 

 

Attached is my secure CRT connection settings.

Screen Shot 2017-09-01 at 5.10.27 PM.png

View solution in original post

2 REPLIES 2

Jeff_Yao
25,349 Views

robinpeter
25,327 Views

New Netapp Controller have Baud Rate as 115200

The old system had the Baud Rate as 9600 

 

 

Attached is my secure CRT connection settings.

Screen Shot 2017-09-01 at 5.10.27 PM.png

Public