How can i revolve this message "has taken over this node" FAS2020

[__GRUPOSALA_15437]

Hello, i have a fas2020 netapp with 2 nodes. In node 1 show me this message "node2 has taken over this node" and the node 2 show me this message "This node has taken over node1".

I'm sorry for my english but i'm from spain

[k_madikiri]

Hi Tomas,

can you use this command cf status  on node2 if the status message says

* node1 waiting for giveback

* issue this command on node2 cf giveback.

*  If you do not see the message " node1 is waiting for giveback" do not issue the above command and contact netapp support.

Kind regards

[gruposala]

i have done giveback but now show me the next message:

In node one: "name_node_2 has taken over this node. Disk shelf fault"

In node two: "This node has taken over name_node_1. Disk shelf fault"

[k_madikiri]

Disk shelf fault can be due to a lot of reasons i recommend contacting Netapp tech support on any of the following numbers.

* 00-800-44-NETAPP

* 00-800-44-638-277
* 34-900-50-2972

regards