we had a FAS 2040 in our warehouse and would like to use it again. We try to power it on withour any network cable because it has the same IP addresses as our new Netapp filers. If we connect it we have the following messages:
AMI BIOS8 Modular BIOS
Copyright (C) 1985-2009, American Megatrends, Inc. All Rights Reserved
Portions Copyright (C) 2009 NetApp, Inc. All Rights Reserved
BIOS Version 6.1
Boot Loader version 2.1
Copyright (C) 2000-2003 Broadcom Corporation.
Portions Copyright (C) 2002-2008 NetApp
4096MB RAM installed
Could not set environment variable 'BMC_FIRMWARE_URL': Environment variable is read-only
CPU Type: Intel(R) Xeon(R) CPU @ 1.66GHz
Starting AUTOBOOT press Ctrl-C to abort...
Loading X86/freebsd/image2/kernel:..0x200000/8113940 0x9bcf14/724580 0xa6e000/593920 Entry at 0x00248810