An account will enable you to access:
Don't have an account?
ONTAP Hardware
Hi Everyone , Currently we are using the FAS 3xxx series with dishshelves DS4243, DS2246 and DS4246 also one MK shelf Now we get new FAS 8xxx series storage . with two new disk shelves DS4246 .which is configured and it is up and running. Now we want to Swap the the old disk shelves attached to 3xxx series to 8xxx series heads . Instead of doing migration. Could any one help me on this with the neat procedure. because we never done it before . Thanks in Advance. Regards, Kranthi Kumar mail-id: kranthi@22by7.in
Hi Everyone ,
Currently we are using the FAS 3xxx series with dishshelves DS4243, DS2246 and DS4246 also one MK shelf
Now we get new FAS 8xxx series storage . with two new disk shelves DS4246 .which is configured and it is up and running.
Now we want to Swap the the old disk shelves attached to 3xxx series to 8xxx series heads . Instead of doing migration.
Could any one help me on this with the neat procedure. because we never done it before .
Thanks in Advance.
Regards,
Kranthi Kumar
mail-id: kranthi@22by7.in
Hi
for the beginnig you can start here.
I completed w/o any major issue. It is a bit different from your environment, however the process pretty much the same.
We soon will be doing another head swap cycle 🙂 to 8xxx series
Here’s a video that explains how to change the security style of a volume from Unix to NTFS in ONTAP 9
Join our Discord Community