Following are the errors I encountered upon replacing a FAS 2040 Controller,
Upon autoboot of the newly replaced controller I got the following error
* Autoboot of primat_image failed. File not found (-18)
Then I performed the follow steps in-order to bring the controller up
1. First performing boot_diags on loader results into following error
Could not load fat://boot0/X86/diag/kernel fat://boot0/X86_ELF/diag/diag.krn: Fi le not found
2. Secondly i tried performing a netboot using tftp server, it results into following error
LOADER-B> netboot tftp://192.168.1.1/734_netboot.e
Loading 192.168.1.1/734_netboot.e:Failed: Timeout occured Could not load tftp://192.168.1.1/734_netboot.e: Timeout occured
*** command status = -21
The reason i am doing this is to boot into maintenance mode and get the system id, and reassign those disks again.
on the other hand,on test basis i ran this command
Could not load fat://boot0/X86/freebsd/image1/kernel fat://boot0/X86_ELF/kernel/
primary.krn: File not found
*** command status = -18
All it reports is kernel error
Please advise a way forward
Please refer to the thread https://communities.netapp.com/message/53080#53080
NetApp Wins One Silver and One Bronze Stevie® Award in 2022 Stevie Awards for Sales and Customer Service
Live Chat, Watch Parties, and More!
Engage digitally throughout the sales process, from product discovery to conﬁguration, and handle all your post-purchase needs.