We have a NetApp V3140 that is to server storage from an HP EVA 8000.
Looking at the fabric layout the NetApp docs for how the EVA is connected to the fabric conflict with the HP best practises and install docs.
The HP EVA8000 has two ports per controller that go to the fabric, labelled as FP1 and FP2.
In the NetApp docs FP1 for each controller goes to a separate fabric switch, as does FP2.
In the HP Docs FP1 for each controller goes to the same fabric switch and FP2 goes to the second fabric switch.
Does anyone have a set of diagrams that shows how there V-Series is linked to the fabric as well as their HP EVA?
The main reason for the question is that the netApp is showing an orange light and cabling has been suggested as an issue.
I don't really want to recable the HP EVA to fabric as that's where the bulk of my storage is and it would then conflict with the HP best practise.