ONTAP Hardware

fcp initiator group (not logged in)

deygaurab
14,908 Views

Hello,

Recently I have added an fcp initiator (wwpn) to an exisiting igroup. after adding , I do not see it as "logged in".. The zoning is good.. Do we need to change some setting or add both the initiators in the igroup together as a best practice.?

    IG_aixsaptst (FCP):

        OS Type: aix

        Member: c0:50:76:03:e8:aa:00:4c (logged in on: vtic, 0d, 1d)

        Member: c0:50:76:03:e8:aa:00:52 (not logged in)

        UUID: 50aed88c-c6a6-11e1-ae2b-00a09820168b

        ALUA: Yes

zone config:

* fcid 0x0c0200 [pwwn 50:0a:09:87:8f:6f:95:82]

* fcid 0x0c0300 [pwwn 50:0a:09:86:8f:6f:95:82]

* fcid 0x0b0027 [pwwn c0:50:76:03:e8:aa:00:52]

any ideas anyone?

Regards

1 ACCEPTED SOLUTION

radek_kubka
14,818 Views

I'd say the missing step is rescanning on the host.

View solution in original post

5 REPLIES 5

radek_kubka
14,818 Views

Hi,

Is the pwwn correct? Did you rescan disks / hba on the host after adding initiator to igroup?

Regards,
Radek

deygaurab
14,818 Views

Hi Radek,

Thanks for the response.  Yes the pwwn correct on the switches.. Is rescanning required on the host side ?

The host is already seeing the LUN over a single path. I added a redundant path today with the other initiator of the host on the other fabric.

  IG_aixsaptst (FCP): 

        OS Type: aix

        Member: c0:50:76:03:e8:aa:00:4c (logged in on: vtic, 0d, 1d)

        Member: c0:50:76:03:e8:aa:00:52 (not logged in)------- redundant initiator of the host which I added

        UUID: 50aed88c-c6a6-11e1-ae2b-00a09820168b

        ALUA: Yes

zone config:

* fcid 0x0c0200 [pwwn 50:0a:09:87:8f:6f:95:82]

* fcid 0x0c0300 [pwwn 50:0a:09:86:8f:6f:95:82]

* fcid 0x0b0027 [pwwn c0:50:76:03:e8:aa:00:52]------ redundant initiator of the host..

The zoning and pwwn looks fine. Is there something I have missed after adding the initiator to the igroup?

The sequence I added it are:

1. Zoning on the switch.

2.Add the initiator to the existing igroup

Regards

Rahul

radek_kubka
14,819 Views

I'd say the missing step is rescanning on the host.

deygaurab
14,818 Views

Thanks Radek, I will try and let you know.

deygaurab
14,818 Views

Hello Radek,

Rescanning on the host worked. Both the initiators in the igroup is showing as logged in .. Many thanks for your help.

Cheers

Rahul

Public