how to find Disk Shelf Firmware for FAS2240-2 for DS2246

[tgottenoef]

Hello,

how can I find the latest Disk Shelf Firmware for FAS2240-2 for DS2246 shelf. the Matrix is very confusing for FAS2xxx.

after upgrade to 8.2.3P3 7-Mode , autosupport risks show me that I dont use the latest Firmware.

my data after upgrade:

> sysconfig -v
NetApp Release 8.2.3P3 7-Mode: Tue Apr 28 14:48:22 PDT 2015
System ID:

slot 0: System Board 1.7 GHz (System Board XIX D2)
Model Name: FAS2240-2

......
......
......

slot 0: SAS Host Adapter 0a (PMC-Sierra PM8001 rev. C, SAS, <UP>)
Firmware rev: 01.12.06.00
Base WWN: 5:00a098:001c548:f0
Phy State: [0] Enabled, 6.0 Gb/s
[1] Enabled, 6.0 Gb/s
[2] Enabled, 6.0 Gb/s
[3] Enabled, 6.0 Gb/s
ID Vendor Model FW Size
00.0 : NETAPP X422_TAL13600A10 NA01 560.0GB (1147307688 520B/sect)
00.1 : NETAPP X422_TAL13600A10 NA01 560.0GB (1147307688 520B/sect)
00.2 : NETAPP X422_TAL13600A10 NA01 560.0GB (1147307688 520B/sect)
00.3 : NETAPP X422_TAL13600A10 NA01 560.0GB (1147307688 520B/sect)

......
......
......

00.21: NETAPP X422_TAL13600A10 NA01 560.0GB (1147307688 520B/sect)
00.22: NETAPP X422_TAL13600A10 NA01 560.0GB (1147307688 520B/sect)
00.23: NETAPP X422_TAL13600A10 NA01 560.0GB (1147307688 520B/sect)
Shelf 0: DS2246 Firmware rev. IOM6E A: 0153 IOM6E B: 0153

......
......
.....

best regards

Thomas

[aborzenkov]

As always: Disk Shelf Firmware

[tgottenoef]

Thanks a lot ....

N/A

IOM6E,SAS,6Gb,R6

FAS22XX systems FAS3XXX systems FAS6XXX systems FAS8XXX systems

IOM6E.0153.SFW

IOM6E Firmware rev 0153

0153 FW fixes Bug 805767 0142 FW fixes Bug 719423 0131 FW fixes Bug 661043 0121 FW fixes Bug 607817 0113 FW fixes Bug 554317

01-AUG-14

wy did I get the risk warning in ASUP my FW is not at the latest version?

[aborzenkov]

This could well be an ASUP bug (it happened in the past). Open case with NetApp and ask them to verify.

[tgottenoef]

thanks a lot, a will do so.

Thomas