ONTAP Hardware

new disk shelf DS4243 to fas 6130

seffysefix
3,357 Views

Hello,

i have FAS 6130 with 1 shelf SAS connected. (1aggr)

i want to add 1 more shelf, but SATA disks (12 SATA disks)

the setps are:

1 - connect the new shelf to the controller with the SAA cable

2 - assign the new disks to the conroller, how? (with disk assign command, any aother way?)

3 -  add the new assigned disks to new aggr with oncommand system manager RAID type: RAID-DP, right?

       1 spare disk.

comment?

thx!

4 REPLIES 4

scottgelb
3,357 Views

We prefer 2 spare disks for maintenance garage. That way disks rapid raid recover and failed drives can be tested to see if they can go back in the spare pool

seffysefix
3,357 Views

thx Scoot,

for only 12 disks, i think i would stay with 1 spare disk

scottgelb
3,357 Views

Agreed. With only 12 disks. I missed that in the original post reading on my phone.

radek_kubka
3,357 Views

It's horses for courses - one hot-spare means more capacity to use; two hot-spares enable drive maintenance, which can investigate a 'dodgy' disk in the background & copy data across before it fails, rather than do a fully-blown  RAID rebuild.

Regards,
Radek

Public