Re: storage show disk

TDUBB1234 · ‎2011-07-20

what does the below output tell me? how mnay shelves of disks?

> storage show disk -T

fDISK SHELF BAY SERIAL VENDOR MODEL REV TYPE

--------------------- --------- ---------------- -------- ---------- ---- ------

0a.00.0 0 0 HZ0AEELL NETAPP X302_HJUPI NA01 BSAS

0a.00.1 0 1 HZ0K9D3L NETAPP X302_HJUPI NA01 BSAS

0a.00.2 0 2 HZ0JXYWL NETAPP X302_HJUPI NA01 BSAS

0a.00.3 0 3 HZ0KLHYL NETAPP X302_HJUPI NA01 BSAS

0a.00.4 0 4 HZ0JZEVL NETAPP X302_HJUPI NA01 BSAS

0a.00.5 0 5 HZ0KW7KL NETAPP X302_HJUPI NA01 BSAS

0a.00.6 0 6 HZ0KLMWL NETAPP X302_HJUPI NA01 BSAS

0a.00.7 0 7 HZ0JMKWL NETAPP X302_HJUPI NA01 BSAS

0a.00.8 0 8 HZ0K9D2L NETAPP X302_HJUPI NA01 BSAS

0a.00.9 0 9 HZ0KW5PL NETAPP X302_HJUPI NA01 BSAS

0a.00.10 0 10 HZ0KW84L NETAPP X302_HJUPI NA01 BSAS

0a.00.11 0 11 HZ0JZ5GL NETAPP X302_HJUPI NA01 BSAS

0a.00.12 0 12 HZ0JYEZL NETAPP X302_HJUPI NA01 BSAS

0a.00.13 0 13 HZ0KLJPL NETAPP X302_HJUPI NA01 BSAS

0a.00.14 0 14 HZ0KLMAL NETAPP X302_HJUPI NA01 BSAS

0a.00.15 0 15 HZ0JLRTL NETAPP X302_HJUPI NA01 BSAS

0a.00.16 0 16 HZ0KW8TL NETAPP X302_HJUPI NA01 BSAS

0a.00.17 0 17 HZ0KLNRL NETAPP X302_HJUPI NA01 BSAS

0a.00.18 0 18 HZ0KLPXL NETAPP X302_HJUPI NA01 BSAS

0a.00.19 0 19 HZ0JJUDL NETAPP X302_HJUPI NA01 BSAS

0a.00.20 0 20 HZ0KLJGL NETAPP X302_HJUPI NA01 BSAS

0a.00.21 0 21 HZ0KLGYL NETAPP X302_HJUPI NA01 BSAS

0a.00.22 0 22 HZ0KLYML NETAPP X302_HJUPI NA01 BSAS

0a.00.23 0 23 HZ0JZXRL NETAPP X302_HJUPI NA01 BSAS

2c.01.0 1 0 WD-WCAW30938573 NETAPP X302_WVULC NA00 BSAS

2c.01.1 1 1 WD-WCAW30829619 NETAPP X302_WVULC NA00 BSAS

2c.01.2 1 2 WD-WCAW30837917 NETAPP X302_WVULC NA00 BSAS

2c.01.3 1 3 WD-WCAW30816240 NETAPP X302_WVULC NA00 BSAS

2c.01.4 1 4 WD-WCAW30939247 NETAPP X302_WVULC NA00 BSAS

2c.01.5 1 5 WD-WCAW30862565 NETAPP X302_WVULC NA00 BSAS

2c.01.6 1 6 WD-WCAW30802832 NETAPP X302_WVULC NA00 BSAS

2c.01.7 1 7 WD-WCAW30832885 NETAPP X302_WVULC NA00 BSAS

2c.01.8 1 8 WD-WCAW30939548 NETAPP X302_WVULC NA00 BSAS

2c.01.9 1 9 WD-WCAW30814902 NETAPP X302_WVULC NA00 BSAS

2c.01.10 1 10 WD-WCAW30799754 NETAPP X302_WVULC NA00 BSAS

2c.01.11 1 11 WD-WCAW30831082 NETAPP X302_WVULC NA00 BSAS

2d.10.0 10 0 HZ0KHHKL NETAPP X302_HJUPI NA01 BSAS

2d.10.1 10 1 HZ0LYNLL NETAPP X302_HJUPI NA01 BSAS

2d.10.2 10 2 HZ0P2RZL NETAPP X302_HJUPI NA01 BSAS

2d.10.3 10 3 HZ0LYJHL NETAPP X302_HJUPI NA01 BSAS

2d.10.4 10 4 HZ0LZZZL NETAPP X302_HJUPI NA01 BSAS

2d.10.5 10 5 HZ0LZ5JL NETAPP X302_HJUPI NA01 BSAS

2d.10.6 10 6 HZ0M8WJL NETAPP X302_HJUPI NA01 BSAS

2d.10.7 10 7 HZ0MG1DL NETAPP X302_HJUPI NA01 BSAS

2d.10.8 10 8 HZ0MG2JL NETAPP X302_HJUPI NA01 BSAS

2d.10.9 10 9 HZ0M7XKL NETAPP X302_HJUPI NA01 BSAS

2d.10.10 10 10 HZ0LYYRL NETAPP X302_HJUPI NA01 BSAS

2d.10.11 10 11 HZ0M8WDL NETAPP X302_HJUPI NA01 BSAS

2d.10.12 10 12 HZ0KV9BL NETAPP X302_HJUPI NA01 BSAS

2d.10.13 10 13 HZ0KNWXL NETAPP X302_HJUPI NA01 BSAS

2d.10.14 10 14 HZ0KGTZL NETAPP X302_HJUPI NA01 BSAS

2d.10.15 10 15 HZ0MG52L NETAPP X302_HJUPI NA01 BSAS

2d.10.16 10 16 HZ0M8VTL NETAPP X302_HJUPI NA01 BSAS

2d.10.17 10 17 HZ0JDR7L NETAPP X302_HJUPI NA01 BSAS

2d.10.18 10 18 HZ0MGARL NETAPP X302_HJUPI NA01 BSAS

2d.10.19 10 19 HZ0M7UEL NETAPP X302_HJUPI NA01 BSAS

2d.10.20 10 20 HZ0LYV1L NETAPP X302_HJUPI NA01 BSAS

2d.10.21 10 21 HZ0M87TL NETAPP X302_HJUPI NA01 BSAS

2d.10.22 10 22 HZ0JDERL NETAPP X302_HJUPI NA01 BSAS

2d.10.23 10 23 HZ0MG98L NETAPP X302_HJUPI NA01 BSAS

2a.11.0 11 0 WD-WMATV8784580 NETAPP X302_WMARS NA06 BSAS

2a.11.1 11 1 WD-WMATV8739375 NETAPP X302_WMARS NA06 BSAS

2a.11.2 11 2 WD-WMATV8737879 NETAPP X302_WMARS NA06 BSAS

2a.11.3 11 3 WD-WMATV8738811 NETAPP X302_WMARS NA06 BSAS

2a.11.4 11 4 WD-WMATV8779682 NETAPP X302_WMARS NA06 BSAS

2a.11.5 11 5 WD-WMATV8735936 NETAPP X302_WMARS NA06 BSAS

2a.11.6 11 6 WD-WMATV8738248 NETAPP X302_WMARS NA06 BSAS

2a.11.7 11 7 WD-WMATV8738576 NETAPP X302_WMARS NA06 BSAS

2a.11.8 11 8 WD-WMATV8784808 NETAPP X302_WMARS NA06 BSAS

2a.11.9 11 9 WD-WMATV8739282 NETAPP X302_WMARS NA06 BSAS

2a.11.10 11 10 WD-WMATV8738323 NETAPP X302_WMARS NA06 BSAS

2a.11.11 11 11 WD-WMATV8738693 NETAPP X302_WMARS NA06 BSAS

2a.11.12 11 12 WD-WMATV8779507 NETAPP X302_WMARS NA06 BSAS

2a.11.13 11 13 WD-WMATV8739276 NETAPP X302_WMARS NA06 BSAS

2a.11.14 11 14 WD-WMATV8735039 NETAPP X302_WMARS NA06 BSAS

2a.11.15 11 15 WD-WMATV8739175 NETAPP X302_WMARS NA06 BSAS

2a.11.16 11 16 WD-WMATV8739248 NETAPP X302_WMARS NA06 BSAS

2a.11.17 11 17 WD-WMATV8738559 NETAPP X302_WMARS NA06 BSAS

2a.11.18 11 18 WD-WMATV8739690 NETAPP X302_WMARS NA06 BSAS

2a.11.19 11 19 WD-WMATV8738821 NETAPP X302_WMARS NA06 BSAS

2a.11.20 11 20 WD-WMATV8738298 NETAPP X302_WMARS NA06 BSAS

2a.11.21 11 21 WD-WMATV8706905 NETAPP X302_WMARS NA06 BSAS

2a.11.22 11 22 WD-WMATV8739176 NETAPP X302_WMARS NA06 BSAS

2a.11.23 11 23 WD-WMATV8738322 NETAPP X302_WMARS NA06 BSAS

>

jakob_bena · ‎2011-07-20

hi,

you can see your attached shelves, with port and shelf id number. disk revision and serialnumber of your disks.

your system has 4 shelves. one is only half full.

TDUBB1234 · ‎2011-07-20

what is the difference between

0a.shelf1

and

0a.shelf0

or

2c.shelf1 and 2c.shelf0

how many shelves do i have?

agireesh · ‎2011-07-20

“Storage show disk” command list the information about all the disk connected to your storage system. If you are using “-T” option then it’ll list type of disk (FCAL, BSAS etc) with extra column.

Regards,

Gireesh

jakob_bena · ‎2011-07-21

you have an internal sas connector, and one additional card in your system.

from your output i can see, that you have 1 shelf connected on your onboard port. 3 shelves are connected on your additional card.

one every sas connector you can add 10 shelves per stack. in the past we had loops with 6 shelves a 14 disks.

shelf 0 or shelf 10, is only the shelf id. you can change it like you want.

0a means, that your diskshelf is connected on your onboard sas port.

2a means, that your diskshelf is connected on a additional card (sas).

0 is everytime onboard device.

1, 2, ,3 .... and so on, is an additinal device. pci slots that you can use

TDUBB1234 · ‎2011-07-21

what about this

for each shef looks it looks like this in filer view

what are the sqr0 cir and sil?

TDUBB1234 · ‎2011-07-21

so the shelves that are connected to the sas card are 2c, 2d, and 2a? what happened to 2b? how many sas ports are there,

TDUBB1234 · ‎2011-07-21

shelf 0 or shelf 10, is only the shelf id. you can change it like you want.

what do you mean change it anyway i like? what does that mean.

> storage show adapter -a

Slot: 0a

Description: SAS Host Adapter 0a (PMC-Sierra PM8001 rev. C)

Firmware Rev: 01.09.01.00

Base WWN: 5:00a098:0000c60:e0

State: Enabled

In Use: Yes

Redundant: Yes

Phy State: [0] Enabled, 3.0Gb/s (9)

[1] Enabled, 3.0Gb/s (9)

[2] Enabled, 3.0Gb/s (9)

[3] Enabled, 3.0Gb/s (9)

Slot: 0b

Description: SAS Host Adapter 0b (PMC-Sierra PM8001 rev. C)

Firmware Rev: 01.09.01.00

Base WWN: 5:00a098:0000c60:e4

State: Disabled

In Use: No

Redundant: Yes

Phy State: [0] Disabled (1)

[1] Disabled (1)

[2] Disabled (1)

[3] Disabled (1)

Slot: 2a

Description: SAS Host Adapter 2a (PMC-Sierra PM8001 rev. C)

Firmware Rev: 01.09.01.00

Base WWN: 5:00e004:000136e:68

State: Enabled

In Use: Yes

Redundant: Yes

Phy State: [0] Enabled, 3.0Gb/s (9)

[1] Enabled, 3.0Gb/s (9)

[2] Enabled, 3.0Gb/s (9)

[3] Enabled, 3.0Gb/s (9)

Slot: 2b

Description: SAS Host Adapter 2b (PMC-Sierra PM8001 rev. C)

Firmware Rev: 01.09.01.00

Base WWN: 5:00e004:000136e:6c

State: Disabled

In Use: No

Redundant: Yes

Phy State: [0] Disabled (1)

[1] Disabled (1)

[2] Disabled (1)

[3] Disabled (1)

Slot: 2c

Description: SAS Host Adapter 2c (PMC-Sierra PM8001 rev. C)

Firmware Rev: 01.09.01.00

Base WWN: 5:00e004:000136e:60

State: Enabled

In Use: Yes

Redundant: Yes

Phy State: [0] Enabled, 3.0Gb/s (9)

[1] Enabled, 3.0Gb/s (9)

[2] Enabled, 3.0Gb/s (9)

[3] Enabled, 3.0Gb/s (9)

Slot: 2d

Description: SAS Host Adapter 2d (PMC-Sierra PM8001 rev. C)

Firmware Rev: 01.09.01.00

Base WWN: 5:00e004:000136e:64

State: Enabled

In Use: Yes

Redundant: Yes

Phy State: [0] Enabled, 3.0Gb/s (9)

[1] Enabled, 3.0Gb/s (9)

[2] Enabled, 3.0Gb/s (9)

[3] Enabled, 3.0Gb/s (9)

what can i tell from all these adapters? 6 total sas adapters.

jakob_bena · ‎2011-07-25

hi,

you can change the shelf id only on your shelf 😉 this is unique

your sas ports 0b and 2b are disable, maybe there are attached disk shelves. you can use it later....

storage show disk

Portfolio Updates | NetApp ONAIR