Object Storage

Setting IP address from BMC

JoseMartins
2,417 Views

Hello,

Is it possible to set IP address for Grid, Admin, Client networks from BMC network?

Many thanks

1 ACCEPTED SOLUTION

MoS1
1,577 Views

Unfortunately we cannot make IP configuration changes to the GRID node and environments from the BMC. In this case since it wasnt setup someone will need to go onsite and access the installer page to finish the configuration. 

View solution in original post

3 REPLIES 3

Jonathan_Wong
2,355 Views

To set IP addresses for Grid, Admin, Client networks they need to access the StorageGRID Appliance Installer.
Either via DHCP or link-local connection.

https://docs.netapp.com/sgws-115/index.jsp?topic=%2Fcom.netapp.doc.sga-install-sg6000%2FGUID-E7C77F0B-42A4-4116-B382-EABBB3182453.html

JoseMartins
2,247 Views

HelloJonathan,

Many thanks. This is clear. the situation is that the technical guy that went onsite only had set BMC IP address... Wondering if it is possible to set any of the other interfaces IP address from BMC interface...

MoS1
1,578 Views

Unfortunately we cannot make IP configuration changes to the GRID node and environments from the BMC. In this case since it wasnt setup someone will need to go onsite and access the installer page to finish the configuration. 

Public