Hi everybody, we do have the problem that we are unable to build a relationship between two, 2-Node vsim cluster. We are only get sim19c51::> cluster peer show Peer Cluster Name Cluster Serial Number Availability Authentication ------------------------- --------------------- -------------- -------------- sim19c50 1-80-000011 Partial ok I made ipspaces, broadcast domains mit mtu 1500 as well as 9000 but still no luck. ipspace sim19c51::> ipspace show (network ipspace show) IPspace Vserver List Broadcast Domains ------------------- ----------------------------- ---------------------------- intercluster intercluster intercluster broadcast domain sim19c51::> broadcast-domain show (network port broadcast-domain show) IPspace Broadcast Update Name Domain Name MTU Port List Status Details ------- ----------- ------ ----------------------------- -------------- intercluster intercluster 9000 sim19c51-02:e0g complete sim19c51-01:e0g complete network interfaces intercluster icl1 up/up 10.19.51.110/8 sim19c51-01 e0g true icl2 up/up 10.19.51.111/8 sim19c51-02 e0g true ports Node: sim19c51-01 Speed(Mbps) Health Port IPspace Broadcast Domain Link MTU Admin/Oper Status --------- ------------ ---------------- ---- ---- ----------- -------- e0g intercluster intercluster up 9000 auto/1000 healthy Node: sim19c51-02 Speed(Mbps) Health Port IPspace Broadcast Domain Link MTU Admin/Oper Status --------- ------------ ---------------- ---- ---- ----------- -------- e0g intercluster intercluster up 9000 auto/1000 healthy we made the cluster peer command with both ICL IP and only one ICL IP cluster peer create -address-family ipv4 -peer-addrs 10.19.50.110,10.19.50.111 -ipspace intercluster but still show partial sim19c51::> cluster peer show Peer Cluster Name Cluster Serial Number Availability Authentication ------------------------- --------------------- -------------- -------------- sim19c50 1-80-000011 Partial ok has anyone an idea what is wrong or missing? thanks in advance for the answers
... View more
I was messing around with the simulator I built on my Windows laptop. But accidentally broke it assigning disks. Currently there are 7 SSDs that are unknown on node 2 After trying to run many commands from cluster. I think the only way to remove those disks is by going into the system shell, like I did to add SSDs. The disks in "unknown" container status are SSDs. I tried to reassign the disks, tried removing the disks, tried disk simpull.... Nothing worked. It keeps telling me: failed to remove disk. Reason: Disk NET-1.37 does not exist. I have 7 SSDs that are in this state. I don't know if it will cause issues with the lab or not?
... View more
Having trouble getting the 9.7 simulator running on an ESXi server (v6.7.0, fwiw). Running into repeated panics, the console not echoing input, and, most recently "Internal error: Cannot open corrupt replicated database. Automatic recovery attempt has failed or is disabled". It *did* get far enough in the CLI wizard for me to assign it an IP, and for me to use the Web wizard to set the root password; but after that, hangs and database problems.
So! None of the instructions mention ESXi, they're all for workstation versions; is ESXi just unsupported now?
... View more
Something like logging is filling root vol0 up you can see the creep in used over just a few seconds. What is running to fill it up? snap and auto support turned off Thanks cluster97-01*> df Filesystem kbytes used avail capacity Mounted on /vol/vol0/ 10957620 956916 10000704 9% /vol/vol0/ /vol/vol0/.snapshot 576716 0 576716 0% /vol/vol0/.snapshot cluster97-01*> df Filesystem kbytes used avail capacity Mounted on /vol/vol0/ 10957620 957004 10000616 9% /vol/vol0/ /vol/vol0/.snapshot 576716 0 576716 0% /vol/vol0/.snapshot cluster97-01*> df Filesystem kbytes used avail capacity Mounted on /vol/vol0/ 10957620 957632 9999988 9% /vol/vol0/ /vol/vol0/.snapshot 576716 0 576716 0% /vol/vol0/.snapshot cluster97-01*>
... View more
Hello, I will soon be setting up our first cdot simulators, for 9.9.1. I've read the install guide and downloaded the files. Can this be deployed in vCenter even though it's not specifically stated? Also, I see that you can deploy two of them but that HA doesn't work. If HA doesn't work, what is the value of having a two node simulated cluster? Thanks!
... View more
