VMware Solutions Discussions

failing to move LUN between volumes with NDMPCOPY

PERSEUSDK
4,285 Views

Hi guys,

I'm trying to move (actually copy) a LUN from one volume to another volume. However, it keeps failing as shown below.

NDCONN-NETAPP-C1> ndmpcopy -d /vol/VMFS_001/ESXI_BOOT_01 /vol/SAN_BOOT

Ndmpcopy: Starting copy [ 4 ] ...

Ndmpcopy: NDCONN-NETAPP-C1: Notify: Connection established

Ndmpcopy: NDCONN-NETAPP-C1: Notify: Connection established

Ndmpcopy: NDCONN-NETAPP-C1: Connect: Authentication successful

Ndmpcopy: NDCONN-NETAPP-C1: Connect: Authentication successful

Ndmpcopy: NDCONN-NETAPP-C1: Log: DUMP: creating "/vol/VMFS_001/../snapshot_for_backup.8" snapshot.

Ndmpcopy: NDCONN-NETAPP-C1: Log: DUMP: Using Partial Volume Dump of selected subtrees

Ndmpcopy: NDCONN-NETAPP-C1: Log: DUMP: Date of this level 0 dump: Thu Apr 19 21:50:15 2012.

Ndmpcopy: NDCONN-NETAPP-C1: Log: DUMP: Date of last level 0 dump: the epoch.

Ndmpcopy: NDCONN-NETAPP-C1: Log: DUMP: Dumping /vol/VMFS_001/ESXI_BOOT_01 to NDMP connection

Ndmpcopy: NDCONN-NETAPP-C1: Log: DUMP: mapping (Pass I)[regular files]

Ndmpcopy: NDCONN-NETAPP-C1: Log: DUMP: Reading file names from NDMP.

Ndmpcopy: NDCONN-NETAPP-C1: Log: DUMP: mapping (Pass II)[directories]

Ndmpcopy: NDCONN-NETAPP-C1: Log: DUMP: estimated 1155120 KB.

Ndmpcopy: NDCONN-NETAPP-C1: Log: DUMP: dumping (Pass III) [directories]

Ndmpcopy: NDCONN-NETAPP-C1: Log: DUMP: dumping (Pass IV) [regular files]

Ndmpcopy: NDCONN-NETAPP-C1: Log: RESTORE: Thu Apr 19 21:50:19 2012: Begin level 0 restore

Ndmpcopy: NDCONN-NETAPP-C1: Log: RESTORE: Thu Apr 19 21:50:19 2012: Reading directories from the backup

Ndmpcopy: NDCONN-NETAPP-C1: Log: RESTORE: Thu Apr 19 21:50:20 2012: Creating files and directories.

Ndmpcopy: NDCONN-NETAPP-C1: Log: RESTORE: Warning: cannot create file on online vdisk ./ESXI_BOOT_01

Ndmpcopy: NDCONN-NETAPP-C1: Log: RESTORE: Thu Apr 19 21:50:20 2012: Writing data to files.

Ndmpcopy: NDCONN-NETAPP-C1: Log: RESTORE: File creation failed on online vdisk: ./ESXI_BOOT_01

Ndmpcopy: NDCONN-NETAPP-C1: Log: DUMP: dumping (Pass V) [ACLs]

Ndmpcopy: NDCONN-NETAPP-C1: Log: RESTORE: File creation failed on online vdisk: ./ESXI_BOOT_01_ntstreams_KLW0000/attributes

Ndmpcopy: NDCONN-NETAPP-C1: Log: RESTORE: File creation failed on online vdisk: ./ESXI_BOOT_01_ntstreams_KLW0000/lunmap

Ndmpcopy: NDCONN-NETAPP-C1: Log: RESTORE: File creation failed on online vdisk: ./ESXI_BOOT_01_ntstreams_KLW0000/prefix

Ndmpcopy: NDCONN-NETAPP-C1: Log: RESTORE: File creation failed on online vdisk: ./ESXI_BOOT_01_ntstreams_KLW0000/suffix

Ndmpcopy: NDCONN-NETAPP-C1: Log: RESTORE: File creation failed on online vdisk: ./ESXI_BOOT_01_ntstreams_KLW0000/persistent.reservations

Ndmpcopy: NDCONN-NETAPP-C1: Log: RESTORE: Thu Apr 19 21:50:24 2012: Restoring NT ACLs.

Ndmpcopy: NDCONN-NETAPP-C1: Log: RESTORE: RESTORE IS DONE

Ndmpcopy: NDCONN-NETAPP-C1: Log: RESTORE: The destination path is /vol/SAN_BOOT/

Ndmpcopy: NDCONN-NETAPP-C1: Log: DUMP: 1152885 KB

Ndmpcopy: NDCONN-NETAPP-C1: Log: DUMP: DUMP IS DONE

Ndmpcopy: NDCONN-NETAPP-C1: Log: DUMP: Deleting "/vol/VMFS_001/../snapshot_for_backup.8" snapshot.

Ndmpcopy: NDCONN-NETAPP-C1: Notify: restore successful

Ndmpcopy: NDCONN-NETAPP-C1: Notify: dump successful

Ndmpcopy: Transfer successful [ 16 seconds ]

Ndmpcopy: Done

The destination volume has adequate space.

Any ideas?

Regards

Lars Christensen

4 REPLIES 4

scottgelb
4,285 Views

This is odd.. can you ndmpcopy the entire volume to volume?  Does that fail?

aborzenkov
4,285 Views

Do you have LUN with the same name on destination volume?

scottgelb
4,285 Views

Good point...if the file exists then can use -f to overwrite.

PERSEUSDK
4,285 Views

Unfortunately no, the destination volume doesn't have a LUN with the same name.

UPDATE: It turned out, that a qtree had been created, which I didn't notice at all.

When I removed the qtree, the ndmpcopy worked as expected.

Thanks for all your answes

Public