Need your help regarding System Setup

[JAFFERALI86]

Hi Guys,

We are doing a new setup with NetApp for our customer and I used the system setup software to do the initial setup. But when I try to access the box using the system setup software I am getting the error (Attached). Please help me to fix this.

Thanks and Regards,

Jaffer Ali

[yannb]

I'm not familiar with System Setup but I know how it works.

How is connected the system to your workstation ? You should be on a physically isolated network since System Setup will provide DHCP and the controllers are supposed to catch an IP from this DHCP server.