Active IQ Unified Manager Discussions

OCUM 9.4 install fails

NetappUser281
2,351 Views

Hello, 

 

I am trying to install OCUM 9.4 on RHEL 7.5.

 

pre_check passed successfully but the package installation is failing completely with the errors as mentioned below.

 


FAILURE: netapp-application-server package installed, but in corrupt state.
Correct the netapp-application-server package and try again.

error: %pre(netapp-platform-base-9.4.0-2018.05.J153.x86_64) scriptlet failed, exit status 255
Error in PREIN scriptlet in rpm package netapp-platform-base-9.4.0-2018.05.J153.x86_64
error: netapp-platform-base-9.4.0-2018.05.J153.x86_64: install failed

netapp-platform-base package is not installed. Install netapp-platform-base package and try again

error: %pre(ocie-server-0:9.4.0-2018.04.J271.x86_64) scriptlet failed, exit status 255
Error in PREIN scriptlet in rpm package ocie-server-9.4.0-2018.04.J271.x86_64
error: ocie-server-0:9.4.0-2018.04.J271.x86_64: install failed

ocie-server package is not installed. Install ocie-server package and try again.

error: %pre(ocie-au-0:9.4.0-2018.04.J271.x86_64) scriptlet failed, exit status 255
Error in PREIN scriptlet in rpm package ocie-au-9.4.0-2018.04.J271.x86_64
error: ocie-au-0:9.4.0-2018.04.J271.x86_64: install failed


FAILURE: ocie-au package is not installed. Install ocie-au package and try again.
Installer will exit now.


error: %pre(netapp-ocum-9.4-1805151340.x86_64) scriptlet failed, exit status 255
Error in PREIN scriptlet in rpm package netapp-ocum-9.4-1805151340.x86_64
Verifying : ocie-au-9.4.0-2018.04.J271.x86_64 1/4
Verifying : ocie-server-9.4.0-2018.04.J271.x86_64 2/4
Verifying : netapp-platform-base-9.4.0-2018.05.J153.x86_64 3/4
Verifying : netapp-ocum-9.4-1805151340.x86_64 4/4

Failed:
netapp-ocum.x86_64 0:9.4-1805151340 netapp-platform-base.x86_64 0:9.4.0-2018.05.J153 ocie-au.x86_64 0:9.4.0-2018.04.J271
ocie-server.x86_64 0:9.4.0-2018.04.J271

Complete!

 

Any suggestion!

 

Thanks in advance.

1 REPLY 1

ruijuan
2,334 Views

I passed this along to one of our DEV in UM eng. He is not able to tell until a full log is provided. So there is no quick answer here. I suggest you contact the support for this case.

Public