Active IQ Unified Manager Discussions

get_disk_attributes: Stop reason: CR_OBJ_NOT_FOUND on Controller's console screen

chadmaupin
17,522 Views

Has anyone ran across this message before?  I'm seeing this message hundreds of times on a controller.  I've done some searching but have not run across any articles.  I've checked and there is no message on the console before these messages begin.  I'm running DOT 8.0.1P4 on a fas3270.

24 REPLIES 24

RalfKunstein
16,019 Views

Got the same message today. We are running the OnTap Version 8.0.2P6 7-mode on a FAS6040 HA pair.

GRAEMEOGDEN
16,019 Views

I'm seeing this message too. DOT 8.0.1 7-mode on FAS2040 pair

stevebarsten
16,019 Views

That pops up in the console screen when I am in System Manager 2.0.1 at the same time and SM makes a call to the filer.   It looks like the error appears once for every disk in the system.  I DO NOT see the error when using SM 2.0

FAS3140 DOT 8.0.2P3 7-Mode HA Pair with SAS and SATA drives.

christin
16,508 Views

I am investigating this and am looking for a bug report or KB article that can offer more information on your issue.

Thanks,

Christine

tuslerbz1
16,508 Views

Christin,

Any luck finding out what is throwing this on the system console... I just noticed it today, and was trying to investigate.

Happens on one of the clustered pair of a FAS3270 - NetApp Release 8.0.2P4 7-Mode - console

get_disk_attributes: Stop reason: CR_OBJ_NOT_FOUND

get_disk_attributes: Stop reason: CR_OBJ_NOT_FOUND

get_disk_attributes: Stop reason: CR_OBJ_NOT_FOUND

get_disk_attributes: Stop reason: CR_OBJ_NOT_FOUND

get_disk_attributes: Stop reason: CR_OBJ_NOT_FOUND

Thanks,

-Brian

christin
16,019 Views

We are currently reviewing the documentation and I will post a link shortly.

Christine

pedro_rocha
16,508 Views

Same messages here. Running 8.0.2P3 7-Mode on V3240. OnCommand SM is 2.0.

Best wishes,

Pedro Rocha.

RACKFORCEBK
16,508 Views

Seeing the same here as well, no news?

get_disk_attributes: Stop reason: CR_OBJ_NOT_FOUND

pankajgadhari
16,508 Views

I am also getting the same messages on the console when I login to OnCommand System Manager 2.0.1 and try to access the storage on the left hand side menu. Any update on this as to why it is happening. I am getting this on FAS3170 and V3170 with DOT 8.0.2P1 7-mode.

get_disk_attributes: Stop reason: CR_OBJ_NOT_FOUND

Thanks

Pankaj

tuslerbz1
15,807 Views

So far the only suggested solition is to upgrade to the later versions of Ontap..

Netapp makes it sound like a simple solution, that we all are going to implement. Yea right[:-\]

They kept referring me to a document that was internal only with no public information and the netapp community..

That was until i pointed out that i was poster 5

I believe there is a bigger problem than they want us to know

Good luck

Brian R. Tusler

Martin Marietta Materials Inc.

2710 Wycliff Rd

<geo:0,0?q=2710WycliffRd%0ARaleigh%2CNC.27607>Raleigh, NC. 27607<geo:0,0?q=2710WycliffRd%0ARaleigh%2CNC.27607>

919-882-2225<tel:9198822225> work

919-427-5828<tel:9194275828> cel

Sent from a Martin Marietta Materials mobile device

GRAEMEOGDEN
15,807 Views

tuslerbz1 wrote:

So far the only suggested solition is to upgrade to the later versions of Ontap..

Netapp makes it sound like a simple solution, that we all are going to implement.   Yea right[:-\]

Yeah, not so easy for those of us who can't upgrade to 8.1!

Nice to finally get some information though, thanks Christine.

tuslerbz1
15,807 Views

Netapp is referring me to this Bug report, and the Netapp Community

http://support.netapp.com/NOW/cgi-bin/bol?Type=Detail&Display=426418

Bug ID

426418

Title

Bug information not available

Fixed-In Version

· Data ONTAP 8.1RC1<http://support.netapp.com/download/software/ontap/8.1RC1/> (First Fixed) - Fixed

· Data ONTAP 8.1<http://support.netapp.com/download/software/ontap/8.1/> (GA<http://support.netapp.com/download/defs/ontap.shtml>) - Fixed

· Data ONTAP 8.1.1RC1<http://support.netapp.com/download/software/ontap/8.1.1RC1/> (RC<http://support.netapp.com/download/defs/ontap.shtml>) - Fixed

Requested, reason, impact, workaround,fix!

Otherwise you are out of luck…

Guess we will just have to deal with it…

Any thoughts on that

Thx

-Brian

KENTRANKIN
15,807 Views

I would love to know about this as well.  Whenever they post the ultra-shady bug's where no information is listed, we find a lot of trouble.  This is not how a responsible support organization should run.

Another great example of this was when the MOOS drives were failing right and left for tons of customers and they just wanted to keep the whole thing under wrap.

christin
15,807 Views

I just wanted to provide an update on this thread. Here is the information I received from our Engineering team:

The message 'get_disk_attributes: Stop reason: CR_OBJ_NOT_FOUND' is a console message generated on Data ONTAP 8.0.x systems configured in HA pairs. It is generated when one node of an HA pair attempts to perform certain operations on disks owned by the partner node. These operations may be initiated by management applications like the System Manager. This message does not indicate an error condition, and can safely be ignored on systems running Data ONTAP 8.0.x.

The public report should be available soon. Thank you all for patience on this issue.

Christine

brandonrjackson
15,807 Views

I also ran into this today.  Working with NetApp we found that this is a "new" BURT 426418 (new only because the website has no information listed about it).  According to NetApp, they can be safely ignored, and the issue was resolved in 8.1.  Hopefully this helps others out!

Brandon

pedro_rocha
13,615 Views

Will OnCommnad System Manager contain any fix for this?!

GRAEMEOGDEN
13,615 Views

Looks like this is fixed in version 2.0.2 of System Manager

MIRANKREUZER
13,615 Views

Hi,

i won't confirm that it is fixed in Version 2.0.2. We have System Manager 2.0.2, and a Metrocluster with 8.0.2P4 and the Message appeared right in my console.

We have planned to Upgrade to Ontap 8.1.1P1 on next Monday, maybe that will solve the Problem.

GRAEMEOGDEN
13,245 Views

Yes I have seen this in the console also on 2.0.2 since posting this. Oh well!

jimmcclung
13,615 Views

Seems to be System Manager related for us as it only started when we upgraded to System Manager 2.0.1 a few months ago. Why an upgrade to 8.1 when System Manager triggers it?

Public