Hi everybody,
I have been surveyed many document in Netapp and citrix, all the documents illustrate iscsi multipath configure with two controllers,
I tried to connect FAS 3140(only one controller) using iSCSI to XenServer 5.6 ,
XenServer host
NIC 0 : 192.168.0.209 /24(management interface)
NIC 1 : 192.168.3.209 /24
NIC 2 : 192.168.4.209 /24
FAS 3140
e0M : 192.168.0.201 /24(management interface)
e0a : 192.168.3.201 /24
e0b : 192.168.4.201 /24
use 3 switches to separate 3 subnet,
set
Target Host: 192.168.3.201,192.168.4.201
use CHAP: User:****** , Password:******
Target IQN : *(192.168.3.201,192.168.4.201:3260)
and Target LUN can be discovered
after Format the iSCSI SR , error appeared , XenServer can't plugging PBD and SIZE=0B in iSCSI SR
because I have only one NetAPP controller ?