Hi All, my first post here so please excuse any innacuracies! I've had our EF2824 for a few days and have configured it, a 10GB switch and a new R740 esxi 6.5 host. It's hosting just a single 2TB datastore. It's all SSD.
I've spun up a windows server 2012 VM for performance testing on the host. Connectivity seems fine and at the moment it's just doing updates - nothing too heavy. onceit's finished I was intending to install benchmarking tools to check performance.
However I have noticed that , even while it's just prepping and write latency is fantastic, read latency is averaging about 50ms so I'm guessing that something is wrong...
I have configured jumbo frames (9000) throughout.
Attached are the performance stats from the device, controller B is taking most of the load and there are 2 latency values for each controller channel:
Controller B Drive Channel 1 (Internal) - seems fine (<2ms)
Controller B Host Channel 1 - abysmal (>60ms)
Does this indicate a network problem if the internal figures are good and (presumably) external figures are bad?
If so, how come write rates are normal? surely a network issue would be bi-directional?
I know I'll eventually get this sorted but any pointers would be gratefully received!