Microsoft Virtualization Discussions
I want to check for each node in the cluster the status of the multi-path and the ACP.
Basically both lines appear one after the other in sysconfig output (node run -node * sysconig).
but I cant figure out how to get it from the powershell toolkit.
I can invoke-ncssh "node run -node currnode sysconig" but i am looking for a more suitable way to do it.
I don’t want to do string parsing if there is another option.
Any idea will be appreciated.
See The Solution
for ACP info, this might have what you need:
(get-ncnode | Get-NcShelfEnvironment).ShelfEnvironShelfList.alternatecontrolpathinformation
for the shelves, one way might be to check the disks for 4 paths (not sure if that covers all the possible edge cases):
get-ncdisk | where -Property paths -ne 4
View solution in original post
Thanks for replaying.
*For the ACP, that is great. thanks.
*For the MultiPath, i thought on that but its tricky.
since you have too many options.
***NoPartner (Single) ***DP = 1 Single PathDP = 2 Multi path
***HA Pair***DP = 1 Single PathDP = 2 DP = 3 DP = 4 Multi path
But, using the ACP command you had found i found this:
i need to run a test on it in lab to see if i am correct, but assuming i do,
this check if the SAS cable is connected, and if all are connected then we have a multi-Path
if only one is connected the using the .ShelfModule (A/B) i can try to assume if i have a single-path or a mix.
Its in Get-NcShelfEnvironment .
I.E: (Get-NcShelfEnvironment -NodeName NODE_NAME).ShelfEnvironShelfList.SesGenericInfo
Join our Discord Community