Hi,
we want to automate disk assignement. As for 8.3 the disk names are different:
8.2:
PS C:\WINDOWS\system32> get-ncdisk
Name Shelf Bay Position Capacity RPM FW Model Paths Aggregate
---- ----- --- -------- -------- --- -- ----- ----- ---------
wdflab101:6c.01.0 1 0 data 417 GB 15k NA02 X411_HVIPC420A15 2 infinittest01
wdflab101:6c.01.1 1 1 dparity 417 GB 15k NA02 X411_HVIPC420A15 2 infinittest01
wdflab101:6c.01.10 1 10 data 417 GB 15k NA02 X411_HVIPC420A15 2 infinittest01
wdflab101:6c.01.11 1 11 data 417 GB 15k NA02 X411_HVIPC420A15 2 infinittest02
on 8.3
PS C:\WINDOWS\system32> get-ncdisk
Name Shelf Bay Position Capacity RPM FW Model Paths Aggregate
---- ----- --- -------- -------- --- -- ----- ----- ---------
1.11.0 11 0 dparity 417 GB 15k NA04 X411_S15K7420A15 4 sas02_201
1.11.1 11 1 parity 417 GB 15k NA04 X411_S15K7420A15 4 sas02_201
1.11.10 11 10 data 417 GB 15k NA04 X411_S15K7420A15 4 sas02_201
1.11.11 11 11 present 417 GB 15k NA04 X411_S15K7420A15 4
1.11.12 11 12 dparity 417 GB 15k NA04 X411_S15K7420A15 4 sas02_202
1.11.13 11 13 parity 417 GB 15k NA04 X411_S15K7420A15 4 sas02_202
as you see there is no way to find the owner
on CLI its working
wdflab2::> disk show
Usable Disk Container Container
Disk Size Shelf Bay Type Type Name Owner
---------------- ---------- ----- --- ------- ----------- --------- --------
1.11.0 408.2GB 11 0 SAS aggregate sas02_201 wdflab201
1.11.1 408.2GB 11 1 SAS aggregate sas02_201 wdflab201
1.11.2 408.2GB 11 2 SAS aggregate sas02_201 wdflab201
1.11.3 408.2GB 11 3 SAS aggregate sas02_201 wdflab201
so also command
get-ncdisk | get-ncdiskowner
Get-NcDiskOwner : This API is not supported as of Data ONTAP 8.3. Please use storage-disk-get-iter.
At line:1 char:30
+ get-ncdisk | get-ncdiskowner <<<<
+ CategoryInfo : InvalidOperation: (10.68.94.166:NcController) [Get-NcDiskOwner], EAPIUNSUPPORTEDVERSION
+ FullyQualifiedErrorId : ApiException,DataONTAP.C.PowerShell.SDK.Cmdlets.Disk.GetNcDiskOwner
So will this be fixed that get-ncdisk
Any ideas?
Best wishes,
Markus.
