Network and Storage Protocols

Fail Connect RSH Netapp by "DOS"

wagnerpcj44
4,252 Views

I can not connect to the netapp storage by RSH, i am trying by Windows "DOS" rsh.exe, below is the error log, can anyone help me?

"DOS"

C:\>rsh netapp01 -l root:netapp1 lun show

Answer Netapp

Mon Jun 14 14:50:08 BRT [netapp01 (takeover): rshd_4:info]: couldn't connect second port on 192.168.92.1
Mon Jun 14 14:50:08 BRT [netapp01 (takeover): rshd_1:info]: couldn't connect second port on 192.168.92.1

thanks

2 REPLIES 2

adamfox
4,207 Views

I did a bug lookup and found burt 187044.  It says this is typically client or network side issue:

rshd is expecting a port number for standard error from the client.  The client
did not return one within 60 seconds, thus rshd timed out with the error
message.

In /etc/messages, there is also:

Tue Nov  8 13:24:03 IST [rshd_0:info]: couldn't connect second port on cornice
Tue Nov  8 13:24:10 IST [rshd_1:info]: couldn't connect second port on cornice

Again this implies that there are no stderr ports on the client cornice.

%%% TITLE: rsh is timing out when reading port number for standard error
%%% DESCRIPTION:
The rsh protocol needs a stdout and stderr port.  When the rsh client and rshd
on the filer are connecting, rshd asks for a stderr port from the client.  rshd
waited 60 seconds for a response and did not receive one, so rshd timed out with
the message: "[rshd_0:error]: rshd: when reading port number for standard error
from <client>, it didn't arrive within 60 seconds."
%%% WORKAROUND:
There is no workaround.
%%% NOTES:
There are some causes for this problem, one is network configuration, the filer
cannot get a return path to the client.  Also the client's reserved ports
may be heavily used.  Do a netstat -a to determine this.

wagnerpcj44
4,207 Views

Hi adam, I managed to configure rsh on NetApp storage, I had free access to the Windows machine and user in the configuration file RSH Manage Access. The test was previously performed on a server in the same range of network, but using NAT, configured to access a server on the same network without NAT, it worked ok. The problem was the return port connection could not return the search result. You were right!

C:\>rsh 10.99.2.141 -l root snap list
Volume vol0
working...

  %/used       %/total  date          name
----------  ----------  ------------  --------
  1% ( 1%)    0% ( 0%)  Jun 17 12:00  hourly.0
  2% ( 1%)    0% ( 0%)  Jun 17 08:00  hourly.1
  4% ( 2%)    0% ( 0%)  Jun 17 00:00  nightly.0
  6% ( 1%)    0% ( 0%)  Jun 16 20:00  hourly.2
10% ( 5%)    1% ( 0%)  Jun 16 00:00  nightly.1
16% ( 6%)    1% ( 1%)  Jun 15 00:00  nightly.2
21% ( 7%)    2% ( 1%)  Jun 14 00:00  weekly.0
36% (24%)    4% ( 2%)  Jun 07 00:00  weekly.1
47% (24%)    7% ( 2%)  May 31 00:00  weekly.2

Thanks for your help.

Public