Network and Storage Protocols
We are currently running 2 x FAS2050 cluster and 1 x FAS2020 with 7.3.2P6 at our offshore facility.
Our HQ is located at San Jose also having 7.3.2x on their various FAS3000 series. Due to replication we use the same version.
However, we are preparing to upgrade to vsphere 5 at offshore facility and encounter that it only support 18.104.22.168 for FC.
If we upgrade our offshore facility to 22.214.171.124 or 126.96.36.199Px, will the replication to 7.3.2x still works?
Or it only affect when there is a major version change for example 7.3 to 7.4 or 8.x?
We support minor revision relationships, just not major revision relationships.
Kindly confirm whether 188.8.131.52 or 184.108.40.206Px version replication will work if the target filer is version 7.3x which is in the same range?
Anyway are you an NetApp employee. Just to make sure I get the correct answer for my management to consider.
Yes it's a minor revision. I would not go from 7.2.x to a 7.3.x family though.
Sorry I am new to netapp version upgrade. Where is the best location or document to look for OnTap upgrade?
eg. for my case 7.3.2Px to 220.127.116.11Px (revision upgrade).
It will be helpful, if not we have to engage NetApp engineer or third party to help us.
I just get a reply from NetApp for confirmation, the support person mention for snapmirror
from 7.3.5.x to 7.3.2.x. it's NOT possible.
However according to article, https://kb.netapp.com/support/index?page=content&id=2010741
minor revision of anything within 7.3.x is possible.
Data OnTap 7.3.x
Let's walk you through the new & improved Knowledge Base and further enrich your experience with NetApp Products.
Join our Discord Community