ONTAP Discussions

Any kind of indication of Ontap 8.1 ETA?

dejanliuit
18,052 Views

We have to plan this years yearly maintenance for this, normaly done during our low-period (summer break, vacation time) and I'm looking at going straight to Ontap 8.1 if it is released.

I wish to upgrade the aggregates to 64bit inplace as we only have about 25% free space left and I'm hoping that Ontap 8.1 would let us do that.

This would give us compression and this release more space instead of investing into more disk (for a while more or until next budget).

Next maintenance period is during christmas/newyears break when we have low pressure on the system, but by then we will probably be forced to invest into more disk before that.

Is there any kind of indication of when Ontap 8.1 is due? At least what quarter 2011 (if at all during this year)?

1 ACCEPTED SOLUTION

kristof_versluys
17,969 Views

Data ONTAP 8.1 shall be in RC1 released on 29th of September. The GA is planned for 15/01/2012.

As with regards to the 32 to 64-bit migration. This is indeed a feature which is implemented and shall be integrated.

Also, when you go above the 16Tb limit, an aggregate shall always and automatically be upgraded to 64-bit (if on 8.1 offcourse).


SnapLock Compliance is also included.

View solution in original post

42 REPLIES 42

ekashpureff
12,251 Views

There's an internal target date, but no public release yet.

I have no indication that 32 to 64 bit aggregate conversion will be a feature.

My clients are waiting on SnapLock Compliance certification.

Don't hold your breath waiting, upgrade to 8.0.1 ...

At your service,


Eugene E. Kashpureff
ekashp@kashpureff.org
Senior Systems Architect / NetApp Certified Instructor
http://www.linkedin.com/in/eugenekashpureff

(P.S. I appreciate points for helpful or correct answers.)

philiparnason
12,036 Views

I'm waiting for this as well.  I'm 8.0.1 and the inplace upgrade to 64 bit aggregates is key for me.  Would be nice to have at least a public target date (it was initially end of last year), and if the inplace upgrade will be a feature or not.

Philip

ANDREW_GALLANT
12,249 Views

I know I am replying to this post late but my SE tells me that it will be the fall. Earlier this year when I worked at Netapp in Engineering all they were working on was 8.1 code. I also hear that 8.1 will include a online 32 to 64bit migration but I can not confirm that just a roomer that I heard.

randalldavis
12,251 Views

Does anyone have any recent info on this topic?

Is there a target release date set yet fo r8.1?

Will it contain a 32 to 64 convert function?

Thanks

Randall

philiparnason
12,251 Views

Yes.  I heard they release THIS MONTH!  So sometime in the next 30 days!  Very excited about this.  It will also have the conversion function, but you need disks available to expand with.

baijulal
12,453 Views

Note that the initial version will be RC.You might have to wait couple of months more to get the GA version.

kristof_versluys
17,970 Views

Data ONTAP 8.1 shall be in RC1 released on 29th of September. The GA is planned for 15/01/2012.

As with regards to the 32 to 64-bit migration. This is indeed a feature which is implemented and shall be integrated.

Also, when you go above the 16Tb limit, an aggregate shall always and automatically be upgraded to 64-bit (if on 8.1 offcourse).


SnapLock Compliance is also included.

bjacobsen
12,249 Views

Can you provide any details on what the 32-bit to 64-bit aggr conversion will entail? Is it truly in-place or does it require additional available disks and an aggregate expansion?

scottgelb
12,249 Views

It will be by growing over 16tb.. Not in place.

Typos Sent on Blackberry Wireless

philiparnason
11,413 Views

Can you do 32 bit to 64 bit snapmirrors?

bjacobsen
11,412 Views

That's disappointing if that's the case, as I have a number of aggregates that will likely never exceed 16TB, but would benefit from a 64-bit aggregate (namely, enabling compression on certain volumes).

scottgelb
11,412 Views

But you can mirror 32 to 64 which may be an alternative.

Typos Sent on Blackberry Wireless

CSMETVOLVO
11,412 Views

I suppose this is a question?

As far I know, 32-bit volumes cannot be snapmirrored with VSM to a 64-bit aggregate.

It would be great if it is possible, this allows us to take the snapshots.

WillFulmer
11,413 Views

Release notes for 8.1 RC1

Support for volume SnapMirror replication between 32-bitand 64-bit volumes

Starting with Data ONTAP 8.1, you can replicate volumes byusing SnapMirror between 32-bit and 64-bit volumes. For both synchronous andasynchronous volume replication, the SnapMirror source and destination volumescan be either 32-bit or 64-bit.

aborzenkov
10,299 Views
It will be by growing over 16tb.. Not in place.

If I read documentation correctly - it will be when going over 16TB and in place

Who needs 64 bit when not exceeding 16TB anyway? Espicially with possibility to replicate between 32 and 64 bit?

I would love if someone shared real life conversion experience. I have customer waiting for it for months, but they do have production databases close to 25TB in total. It would be lengthy and costly attempt to restore from backup ...

bjacobsen
10,294 Views
Who needs 64 bit when not exceeding 16TB anyway? Espicially with possibility to replicate between 32 and 64 bit?

You need 64-bit aggrs for volume compression, so it would be nice to in-place convert a sub-16TB aggr to be able to utilize that.

scottgelb
10,294 Views

That’s a good point.. there is a way with VSM from 32 to 64 but requires enough disk to do it….but is a way to get the volume migrated without going over 16TB…but would have been nice to have an in place conversion without the brute force. But I am happy to get 32 to 64bit finally which has been a bit of a qsm/ndmpcopy pain.

radek_kubka
10,294 Views

Are we saying that (according to documentation) the only way to do an in-place migration of a 32-bit aggregate to a 64-bit one, is to increase its size over 16TB?

That's a bit odd. It's hard to believe that doing this 'normal' way (without going over 16TB) is technically any different.

I am expecting / hoping for an undocumented 'migrate_below_16t' command requiring diagnostic mode

Regards,
Radek

scottgelb
10,294 Views

Yes. No in place conversion. There might be a diag method but it won't be a supported method to convert 32 to 64.

Typos Sent on Blackberry Wireless

radek_kubka
10,294 Views

Hopefully it will change in ONTAP 8.1.1 (or whatever next version), as again - I can't get my head around why a 16TB+ aggregate can be converted, whilst a smaller one cannot.

Public