ONTAP Discussions

Critical power supply request error on disk shelf

asharmaA
2,689 Views

We have a disk shelf DS4243 with 23 7200 RPM disk. We are receiving multiple errors related to power supply. We have installed 2 PSUs in the disk shelf. The error is :- Not enough power supplies are present in channel XX disk shelf XX to satisfy disk drive and shelf power requirements. 

I am unable to find any document or recommendation from NetApp related to the number of PSUs required to support 23 disk of 7200 RPM in a shelf.

1 ACCEPTED SOLUTION

andris
2,645 Views

If you ever inserted a SAS disk in the shelf, you might run into this bug:

https://mysupport.netapp.com//NOW/cgi-bin/bol?Type=Detail&Display=743717

View solution in original post

2 REPLIES 2

paul_stejskal
2,658 Views

I'd open a case to review your logs. It may be two or four depending on documentation, but it should be 1 and 4.

 

I'd check the DS4243 documentation.

andris
2,646 Views

If you ever inserted a SAS disk in the shelf, you might run into this bug:

https://mysupport.netapp.com//NOW/cgi-bin/bol?Type=Detail&Display=743717

Public