HI All
Hoping someone can help me release a snapmirror relationship.
Some background (was testing) I reversed a snapmirror sync from B to A within OnCommand then before the transfer completed I hit cancel. Now within Oncommand I see Transfer Failed but I cannot delete this as its greyed out. On the filer when I do a snapmirror status is see the following:
snapmirror status
.
Source Destination State Lag Status
BFAS01:V0L1 AFAS01:V0L1 Source - Idle
snapmirror status on destination shows no relationship.
I have tried snapmirror release, abort, break, off, on release all of which give different messages and do not clean up the event.
I need this cleared for cleanup purposes but cannot delete the volumes just yet.
Any help would be great.
Thank you