ONTAP Discussions
ONTAP Discussions
I am getting the following error. What name should I use after the option of "-filer"? I tried cluster name, vserver name, and node name, all result the same error. What is the right sytax?
Please help!
# snapdrive storage list -filer cluster_name
0002-691 Command error: Invalid switch for NFS only filespecs
Magic -
For snapdrive from a host it would be the vserver mgt interface.
Did you configure snapdrive with correct credentials for the vserver ?
I hope this response has been helpful to you.
At your service,
Eugene E. Kashpureff, Sr.
Independent NetApp Consultant http://www.linkedin.com/in/eugenekashpureff
Senior NetApp Instructor, Fast Lane US http://www.fastlaneus.com/
(P.S. I appreciate 'kudos' on any helpful posts.)
Yeah, I tried using vserver-admin, but got the same error:
# snapdrive storage list -filer vservername-admin
0002-691 Command error: Invalid switch for NFS only filespecs
# snapdrive config list
username appliance name appliance type
-----------------------------------------------
vsadmin vservername-admin StorageSystem
vsadmin vservername StorageSystem
How do I configure snapdrive with correct credentials for the vserver? I don't see steps in "Installation Guide for Linux". Can you PLEASE let me know detail steps?
Magic -
The command to set credentials is:
snapdrive config set username vservername
You'll be prompted to enter the credentials.
I hope this response has been helpful to you.
At your service,
Eugene E. Kashpureff, Sr.
Independent NetApp Consultant http://www.linkedin.com/in/eugenekashpureff
Senior NetApp Instructor, Fast Lane US http://www.fastlaneus.com/
(P.S. I appreciate 'kudos' on any helpful posts.)
I have already done with setting credentials by run "snapdrive config set username vservername".
Based on the error messages, it seems not credentials related.
Any other ideas?