ONTAP Discussions

Error 500 Servlets not enabled In Fas 2020

UdayPrasad
20,992 Views

Hello Team,

 

I was new in configuration and while i was setting up and all done the foillowing error was posting in GUI session 

 

Error 500

Servlets not enabled

 

 NetApp Release 7.2.4L1: So please help me out, thanks in advacne.

 

Best Regards,

P Uday Prasad

1 ACCEPTED SOLUTION

UdayPrasad
20,943 Views

Team Please any one help me

View solution in original post

8 REPLIES 8

mbeattie
20,969 Views

Hi,

 

Please see the following KB article:

 

https://kb.netapp.com/support/s/article/ka11A0000001TKJQA2/filerview-error-error-500-servlets-not-enabled

 

/Matt

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

UdayPrasad
20,965 Views

Hello,

 

I dont have the access for the link please share the entire info here please. its urgent as out of running from Storage space, thanks in advance.

 

mbeattie
20,958 Views

Hi,


Here is the external URL to the KB article.

 

https://kb.netapp.com/support/s/article/ka11A0000001TKJ/filerview-error-error-500-servlets-not-enabled

 

If your storage controller is not accessible via FilerView then you can access it via SSH remotely or from the console.

I'd advise you raise a support case to resolve your issue.

 

/Matt

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

UdayPrasad
20,955 Views

Hey, 

 

Still i was unable please help me as i was running out of storage space i need to push this into the production. 

UdayPrasad
20,944 Views

Team Please any one help me

UdayPrasad
20,900 Views

GuGuys please still waiting

AlexDawson
20,877 Views

The GUI management is optional - you can still manage this system over CLI via ssh or telnet. 

 

The official fix is to put the ontap.exe file for 7.2.1P4 back on the system and run "software install ontap.exe", then reboot when the OS reinstall is done.

 

 

You can probably do it via the command line with:

 

priv set diag

mv /etc/.onboot/java /etc/java

reboot

 

Good luck!

JGPSHNTAP
20,831 Views

Also, your system is so old and not supported anymore.  Time to upgrade!

Public