Hi!
Updated DFM to 5.0.0.7641 (5.0D1) a couple of days ago..
Since then I get this strange error message.
"/vol/MyVol is full (using or reserving 1451% of space and 13% of inodes, using 1451% of reserve)."
I even got one saying it´s using or reserving 800 milion % ??
Checking with df commands doesn´t show any problem
df MyVol
Filesystem kbytes used avail capacity Mounted on
/vol/MyVol/ 17676051488 7201899736 10474151752 41% /vol/MyVol/
/vol/MyVol/.snapshot 0 348941844 0 ---% /vol/MyVol/.snapshot
df -i MyVol
Filesystem iused ifree %iused Mounted on
/vol/MyVol/ 8191317 56837125 13% /vol/MyVol/
df -rg MyVol
Filesystem total used avail reserved Mounted on
/vol/MyVol/ 16857GB 6868GB 9988GB 0GB /vol/MyVol/
/vol/MyVol/.snapshot 0GB 332GB 0GB 0GB /vol/MyVol/.snapshot
df -rh MyVol
Filesystem total used avail reserved Mounted on
/vol/MyVol/ 16TB 6868GB 9988GB 0GB /vol/MyVol/
/vol/MyVol/.snapshot 0GB 332GB 0GB 0GB /vol/MyVol/.snapshot
Snap reserve is set to 0%, guarantee=none, fractional_reserve=0
Don´t have any old snaps on the volume (only have 30 days retention on the snaps)
Don´t think growing the volume would help as it´s only using 41% of space and 13% of iNodes.
The aggr it´s located in is only 81% full an have 11TB available
Any ideas?
