ONTAP Discussions

FAS3140 got panic how can i handle it?

jizzzy
3,448 Views

Hi All.

 

I want to know about this error message but i can't find fas3140 documention. How to guide this error message and fix it?

 

panic="PCI Error NMI from device(s): NVRAM7 on motherboard. HT2000(1) FATAL - EXB(0,9,0): RootErr(UCor,FUCFT,Fatal); Dv[0009](6,0,0): Status(RcvSysErr). in process idle_thread0 on release NetApp Release 7.3.7P1"

 

regards.

4 REPLIES 4

Ontapforrum
3,441 Views

Hi,

 

Looks like a known issue, there is a public bug:

PANIC: PCI Error NMI from device(s): NVRAM7 on motherboard. HT2000(1) FATAL
https://mysupport.netapp.com/site/bugs-online/product/ONTAP/BURT/326037

 

Workaround:
Replace the NVRAM7 DIMM

 

Your filer must be in a failed-over state, but I believe if you give-back it will panic again, workaround suggest replacing PCI DIMM., only then give-back.

 

Thanks!

Ontapforrum
3,436 Views

There is another advisory for the same: If this error persists, RCA the motherboard
https://mysupport.netapp.com/site/bugs-online/product/ONTAP/BURT/376498

 

Contact your support personnel for the recommended course of action.

 

Thanks!

JGPSHNTAP
3,415 Views

First you are on hardware that is EOL, and second your OS is about 10 years old.   

 

IT's time to upgrade and get off this system, you shouldn't be running this

TMACMD
3,372 Views

Another option not mentioned yet...

Re-seat *everything*. All DIMMS, all Cards.

It might help. SHould not hurt to at least try!

 

In case you are wondering,

The NetApp Part number is: X3178A-R6, the MFG # is107-00024
2GB Memory DIMM, DDR, ECC, NVRAM

Public