Hi All,
I have run into snapmirror transfer errors due to the destination is being full.
However the destination volume is not full, rather one of the two constituents is:
> volume show -is-constituent true
Vserver Volume Aggregate State Type Size Available Used%
--------- ------------ ------------ ---------- ---- ---------- ---------- -----
<--snip-->
aggr_01_2 online DP 100TB 16KB 99%
aggr_01_1 online DP 60TB 20.59TB 65%
When I increased the size of the Volume ontap added the additional space to the constituent that was not full while leaving the constituent that was full in the full state.
volume modify -vserver name -volume My_1_vault -size +20TB
<---snip--->
aggr_01_2 online DP 100TB 16KB 99% <<< NO increase
aggr_01_1 online DP 100.00TB 60.59TB 39% <<< 40TB increase
Is there any way to increase one specific constituent?
I was thinking that I could add a third constituent but it would still leave the full constituent full.
Thank you for any ideas to solve this!
Bela