ONTAP Discussions

Metrocluster and NDMP Tapebackup

Baiju
2,045 Views

Hi Gurus,

 

In ONTAP 9.X MetroCluster solution can we configure node scoped NDMP Tape backups from the DR site (assuming SVM scopped will not work as SVMs are not online at DR iste)? please advise

 

 

 

1 ACCEPTED SOLUTION

ttran
1,856 Views

 

There are specific configuration and node-specific connection methods required to use to perform NDMP backup on an SVM DR. Essentially you must connect directly to the node via the Cluster Management LIF that hosts the volume that is owned by the SVM DR as the DATA LIF for the SVM DR will not be accessible.

 

Below is a KB that explains briefly NDMP architecture and what conditions where it will and will NOT work on an SVM DR:

NDMP Backup on SVM DR 

 

To enable node-scope NDMP:

Enable node-scope NDMP 

 

Regards,

 

Team NetApp

Team NetApp

View solution in original post

1 REPLY 1

ttran
1,857 Views

 

There are specific configuration and node-specific connection methods required to use to perform NDMP backup on an SVM DR. Essentially you must connect directly to the node via the Cluster Management LIF that hosts the volume that is owned by the SVM DR as the DATA LIF for the SVM DR will not be accessible.

 

Below is a KB that explains briefly NDMP architecture and what conditions where it will and will NOT work on an SVM DR:

NDMP Backup on SVM DR 

 

To enable node-scope NDMP:

Enable node-scope NDMP 

 

Regards,

 

Team NetApp

Team NetApp
Public