ONTAP Discussions

NFS Datastore volume with two or more host

AdminNetapp091320
3,618 Views

Hello Experts,

 

Would like to know if we can assign a volume to a multiple host that is part of a host cluster or different cluster? I need to align this on my VMware requirement as I need to see the Datastore on another host. Please advise.

Thanks!

 

1 ACCEPTED SOLUTION
AdminNetapp091320 has accepted the solution

SpindleNinja
3,589 Views

I checked with a contact at VMware - 

OK to map to multiple hosts or host clusters.   

Cannot map to multiple storage clusters.  
VAAI should be OK as long as the datastore has the same UUID everywhere. 

 

View solution in original post

7 REPLIES 7

SpindleNinja
3,597 Views

As long as the networking/zoning is there, yeah, it's not a problem.   

paul_stejskal
3,588 Views

That said, I don't know if it would cause problems on the VMware side or some of the VAAI specific features. NFS datastores in general or any export can be mounted by anyone who has access and connectivity.

AdminNetapp091320 has accepted the solution

SpindleNinja
3,590 Views

I checked with a contact at VMware - 

OK to map to multiple hosts or host clusters.   

Cannot map to multiple storage clusters.  
VAAI should be OK as long as the datastore has the same UUID everywhere. 

 

AdminNetapp091320
3,517 Views

Does it mean that the adjustment or the configuration is more on the VMWare side? And no further action on the Netapp side?

AdminNetapp091320
3,517 Views

So this is going to be more on VMWare configuration?

SpindleNinja
3,498 Views

Yeah.  From the NetApp side you just need lifs (that can see the hosts) and the export policy set to allow R/W access. 

 

 

  

AdminNetapp091320
3,517 Views

My Storage is  IP based environment

Public