ONTAP Discussions

[NetApp 9.8] cluster join from node in a different subnet

YashFareki
2,309 Views

Hello there,

 

I'd like to know if I can join an existing ONTAP 9.8 cluster from a node (ONTAP 9.8) located in a different subnet.

Does the node must be in the same subnet than the cluster one?

 

I don't find anything about this subject, if you have any documentation about this question i'll take it!

 

Regards.

Yash

1 ACCEPTED SOLUTION

SpindleNinja
2,261 Views

ok, that's a little different. I'll still ask why, and if it needs to be separate, can it just be its own cluster?   

 I did some digging through docs, and couldn't find anything specific to this as far as best practices.     I would be careful that the cluster mgmt lif doesn't some how end up on the other pair. 

View solution in original post

7 REPLIES 7

SpindleNinja
2,296 Views

Do you mean the node mgmt IP?  

YashFareki
2,292 Views

Absolutely

SpindleNinja
2,288 Views

Node 1's mgmt IP on subnet A and node 2's IP on subnet B. 

Why?  

 

While I think you could, though hwassit could be affected,  i wouldn't do it for any customer.

 

 

YashFareki
2,284 Views

Node[1-2-3-4-5-6] are in the same subnet but not node[7-8].

This is actually the configuration imposed by the network team of my company. I unfortunately cannot change that!

 

Will nodes[7-8] be able to join the cluster?

SpindleNinja
2,262 Views

ok, that's a little different. I'll still ask why, and if it needs to be separate, can it just be its own cluster?   

 I did some digging through docs, and couldn't find anything specific to this as far as best practices.     I would be careful that the cluster mgmt lif doesn't some how end up on the other pair. 

YashFareki
2,267 Views

Does someone has NetApp official documentation about this?

Thanks.

YashFareki
2,215 Views

Thank you @SpindleNinja for your reply, I think that it would be wiser to move the nodes into the same subnet.

 

I am however surprised that this subject is not documented.

 

Thanks again.

Yash

Public