Solved: No interfaces e0M

hlebodar2010 · ‎2015-12-18

hello everyone!

Netapp FAS2040-2, NetApp Release 8.1.4P6 7-Mode

The problem is, there is no interface e0M, When we insert cable to it there is a light blinking indicating that it is functioning.

asulliva · ‎2015-12-18

A 2040 only has a BMC, no e0M. Use the "bmc" commands to configure it, it's config doesn't go in the rc files.

Andrew

If this post resolved your issue, please help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

asulliva · ‎2015-12-18

A 2040 only has a BMC, no e0M. Use the "bmc" commands to configure it, it's config doesn't go in the rc files.

Andrew

If this post resolved your issue, please help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

hlebodar2010 · ‎2015-12-18

Oh, thats right! old systems use BMC.

Many thanks.

No interfaces e0M