ONTAP Discussions

ONTAP upgrade from 9.1 to 9.3P20

sfrmast
4,301 Views

Received below warning before upgrade, can you advice about CIFS warning, how to proceed further. Will be there any downtime for end user

sfrmast_0-1642593808982.png

 

1 ACCEPTED SOLUTION

DarrenJ
4,209 Views

Yes that would work.

 

No, sessions will be automatically reestablished by the client as needed. Nothing else is required from NetApp side in regards to CIFS connections. Once the upgrade is complete I would be sure to check that all LIFs are "home" on their home node, however. 

View solution in original post

7 REPLIES 7

Ontapforrum
4,268 Views

CIFS sessions must be terminated BEFORE UPGRADE, unless they are "Continuously available CIFS shares". Yes,  there will be downtime for SMB/CIFS users. When you stop CIFS or terminate CIFS sessions, users will be disconnected.

 

Just go to this thread, and follow the steps given by - robinpeter
https://community.netapp.com/t5/ONTAP-Discussions/CIFS-and-Ontap-upgrade-to-9-1/td-p/129930

sfrmast
4,231 Views

What would be the best approach to terminate the CIFS sessions before proceeding with the Data ONTAP upgrade. After upgrade can user access the data ? 

Kindly recommend some commands to gracefully shutdown all CIFS session 

DarrenJ
4,226 Views

Check out the below KB for how to close CIFS sessions from the CLI.

https://kb.netapp.com/Advice_and_Troubleshooting/Data_Storage_Software/ONTAP_OS/How_to_terminate_a_CIFS_sessions_in_ONTAP_9_for_specific_Windows_users

 

If you terminate the CIFS session from the client, this would work as well, but doing via CLI is likely faster and easier.

sfrmast
4,214 Views

Can we close all session from SVM as below : (gracefully) for 9.1 ONTAP) have more than 15 entries sometimes

::> cifs session close -node * -vserver vServer-01 

Do we need to do any other configuration after upgrade from system manger for CIFS?

 

 

DarrenJ
4,210 Views

Yes that would work.

 

No, sessions will be automatically reestablished by the client as needed. Nothing else is required from NetApp side in regards to CIFS connections. Once the upgrade is complete I would be sure to check that all LIFs are "home" on their home node, however. 

sfrmast
4,165 Views

I will do this and will update you the status

sfrmast
4,240 Views

What would be the best approach to terminate the CIFS sessions before proceeding with the Data ONTAP upgrade. After upgrade can user access the data ? 

Kindly recommend some commands to gracefully shutdown all CIFS session .

Public