ONTAP Discussions

OS disks , adding disks and Raid

MetroLife
1,862 Views

Hi Team,

 

I am new to Netapp Please help me with below points.

 

1. How many OS disks and which type of OS RAID

 

As per my knowlege 3 disks with RAID-DP, but to configure RAID DP we need minimum 5 disks. Is this correct info?

 

2. we can add  more disks to root aggr ?

 

Yes we can add more disks to increase. Correct me if am wrong

 

3. Can we change RAID-DP to RAID 4 for root aggr ?

1 ACCEPTED SOLUTION

SeanHatfield
1,844 Views

1  What you are calling the OS disks is generally called the root aggregate.  By default, it uses 3 disks in RAID-DP unless advanced drive partitioning is in use, in which case it uses a small partition from several disks to form the root aggregate. The OS actually boots off embedded flash media, but needs a root volume on a root aggregate to store persistent configuration and logging data.  The 5 disk minimum is for a data aggregate. 

 

2.  It is possible to add disks to the root aggregate, but in practice it would be unusual to do so.  Historically this was fairly common in 7mode.

 

3.  It is possible, but not recommended, to use raid4.  You can convert an aggregate from RAID-DP to RAID4 as long as it does not exceed the limits for RAID4.

 

 

 

 

 

 

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

View solution in original post

1 REPLY 1

SeanHatfield
1,845 Views

1  What you are calling the OS disks is generally called the root aggregate.  By default, it uses 3 disks in RAID-DP unless advanced drive partitioning is in use, in which case it uses a small partition from several disks to form the root aggregate. The OS actually boots off embedded flash media, but needs a root volume on a root aggregate to store persistent configuration and logging data.  The 5 disk minimum is for a data aggregate. 

 

2.  It is possible to add disks to the root aggregate, but in practice it would be unusual to do so.  Historically this was fairly common in 7mode.

 

3.  It is possible, but not recommended, to use raid4.  You can convert an aggregate from RAID-DP to RAID4 as long as it does not exceed the limits for RAID4.

 

 

 

 

 

 

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.
Public