Interesting problem on one HA Node.
The ‘storage show disk –p’ and ‘aggr status –r’ output shows ? for Shelf 3 drives on only 1 node in the 7-Mode HA Pair.
The other node shows normal.
The ‘sysconfig –a’ command shows everything normal on both nodes.
1b.02.22 A 1c.02.22 B 2 22
1b.02.23 A 1c.02.23 B 2 23
1b.03.0 A 1c.03.0 B ? ?
1b.03.1 A 1c.03.1 B ? ?
1b.03.2 A 1c.03.2 B ? ?
1b.03.3 A 1c.03.3 B ? ?
The nodes both show DP/HA and the drives are in use on both Nodes.
See The Solution
If the issue is only with one node, ideally a takeover and giveback should fix it.
Here are two bugs you may want to review.
View solution in original post
Have you updated the disk qualification package on the nodes?
The same QualPack is running in both nodes. It is an older one but, then, so are the drives which were added (X477 - HDD, 4.0TB, 7.2K, SAS).
The same type shelf/drive were installed on multiple systems with only this one node having issues.
Aman: Bug 875483 sounds like the issue. The system is working properly so it may be only cosmetic. I will look into performing a Takeover/Giveback in the future.
Great, it's just a reporting issue, to/gb will take care if it.
Let's walk you through the new & improved Knowledge Base and further enrich your experience with NetApp Products.
Join our Discord Community