ONTAP Discussions

System is using a mixture of single path and multi-path HA attached storage.

ANTONIO_SIMULA

Hi All, I have a problem with FAS2240-4 7-mode with two shelf of disk,

 

under command : storage show disk -p

 

In shelf with dual path I see that only a disk not have  a dual-path :

 

PRIMARY  PORT  SECONDARY PORT SHELF BAY
-------- ----  --------- ---- ---------
0a.00.0   A    0b.00.0    B     0    0  
0a.00.1   A    0b.00.1    B     0    1  
0a.00.2   A    0b.00.2    B     0    2  
0a.00.3   A    0b.00.3    B     0    3  
0a.00.4   A    0b.00.4    B     0    4  
0a.00.5   A                     0    5  
0a.00.6   A    0b.00.6    B     0    6  
0a.00.7   A    0b.00.7    B     0    7  
0a.00.8   A    0b.00.8    B     0    8  
0a.00.9   A    0b.00.9    B     0    9  
0a.00.10  A    0b.00.10   B     0   10  
0a.00.11  A    0b.00.11   B     0   11  
0a.00.12  A    0b.00.12   B     0   12  
0a.00.13  A    0b.00.13   B     0   13  
0a.00.14  A    0b.00.14   B     0   14  
0a.00.15  A    0b.00.15   B     0   15  
0a.00.16  A    0b.00.16   B     0   16  
0a.00.17  A    0b.00.17   B     0   17  
0a.00.18  A    0b.00.18   B     0   18  
0a.00.19  A    0b.00.19   B     0   19  
0a.00.20  A    0b.00.20   B     0   20  
0a.00.21  A    0b.00.21   B     0   21  
0a.00.22  A    0b.00.22   B     0   22  
0a.00.23  A    0b.00.23   B     0   23  
0b.01.0   B    0a.01.0    A     1    0  
0b.01.1   B    0a.01.1    A     1    1  
0b.01.2   B    0a.01.2    A     1    2  
0b.01.3   B    0a.01.3    A     1    3  
0b.01.4   B    0a.01.4    A     1    4  
0b.01.5   B    0a.01.5    A     1    5  
0b.01.6   B    0a.01.6    A     1    6  
0b.01.7   B    0a.01.7    A     1    7  
0b.01.8   B    0a.01.8    A     1    8  
0b.01.9   B    0a.01.9    A     1    9  
0b.01.10  B    0a.01.10   A     1   10  
0b.01.11  B    0a.01.11   A     1   11  
0b.01.12  B    0a.01.12   A     1   12  
0b.01.13  B    0a.01.13   A     1   13  
0b.01.14  B    0a.01.14   A     1   14  
0b.01.15  B    0a.01.15   A     1   15  
0b.01.16  B    0a.01.16   A     1   16  
0b.01.17  B    0a.01.17   A     1   17  
0b.01.18  B    0a.01.18   A     1   18  
0b.01.19  B    0a.01.19   A     1   19  
0b.01.20  B    0a.01.20   A     1   20  
0b.01.21  B    0a.01.21   A     1   21  
0b.01.22  B    0a.01.22   A     1   22  
0b.01.23  B    0a.01.23   A     1   23  

 

I don't think that there is a problem with shelf connection cable, but i don't understand because this Disk not see in Dual Path 

 

Can you help me ?

 

thanks

Antonio

3 REPLIES 3

hariprak

Hi,

 

Can you provide us below command output,

disk show -v
disk show -n

 

For General SAS Cabling Rules, refer https://library.netapp.com/ecm/ecm_get_file/ECMM1280392

Also refer KB article, https://kb.netapp.com/support/index?page=content&id=2023388&actp=RSS

 

Thanks

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

venkat3

In addition to above you may want to use config advisor which would clearly list out issues if any.

 

http://mysupport.netapp.com/NOW/download/tools/config_advisor/

or

http://mysupport.netapp.com/tools/info/ECMS1357843I.html?productID=61923/

 

-SR

ANTONIO_SIMULA

Hi all, thanks for your answers, but yeasterday i opened a support ticket . 

 

Now i set this disk in failed status and look replacement .

 

thanks

 

Antonio

Announcements
NetApp on Discord Image

We're on Discord, are you?

Live Chat, Watch Parties, and More!

Explore Banner

Meet Explore, NetApp’s digital sales platform

Engage digitally throughout the sales process, from product discovery to configuration, and handle all your post-purchase needs.

NetApp Insights to Action
I2A Banner
Public